Samsung Sprint Power Vision A900 User Manual page 50

Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the opening on the back of the
phone at a 45-degree angle, making sure to line up the
gold contacts. Gently press down until it snaps into
place.
2.
Install the protective cover by lining up the tabs at a
45-degree angle and gently press down until the cover
snaps into place.
Removing the Battery
To remove your battery:
1.
Remove the protective cover by pressing the release
latch and pulling up on the back of the cover.
2.
Grip the battery at the bottom and pull up and out at a
45-degree angle.
26 Section 2A: Your Sprint Power Vision Phone: The Basics
2
1
2
1
4
3
3