Adapting Digit Dial - Samsung A640 Instruction Manual

Adapting Digit Dial

Digit Dialing is speaker-independent, which means that no
training or adaptation is required. Some users with heavy
accents or unusual voice characteristics may find difficulty in
achieving high accuracy with speaker-independent Digit
Dialing, so the Adapt Digits feature allows users to
dramatically improve the digit accuracy through adaptation.
Users who get acceptable digit recognition accuracy will find
no additional benefit to performing the Adapt Digit
adaptation.
After you adapt Digit Dial, your phone will be customized to
your voice. Other people will not be able to use Digit Dial on
your phone unless they reset the phone to factory defaults.
Note:
Adapt Digit Dial ONLY if the system frequently misrecognizes
your speech. You can always restore the system to its original
factory setting.
Adaptation involves recording several digit sequences to
teach the system your voice. The adaptation process takes
about three minutes.
Tips for adapting Digit Dial:
Adapt digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, but say each digit sequence naturally.
If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils the
recording, you can say "No" or select No when the prompt
asks, "Did the recording sound OK?" You will then be
prompted to rerecord the sequence.
Section 2H: Using Your Phone's Voice Services 117