The Buttons Tab - ATI Technologies Remote Wonder Mac Edition Installation Instructions Manual

The Buttons tab

This tab allows you to assign a specific application to any button between A to F on
the Remote Wonder. Once assigned, simply press the specified button on the
Remote Wonder.
Buttons A-F Settings
No Action sets the remote to take no action when the specified button is
pressed.
Global Action performs the same action for a Remote Wonder button
defined in Global Profile.
Keystroke... allows you to assign a specific key or key combination
from the computer's keyboard to a button (A-F) on the Remote Wonder.
Open/Launch Item... allows you to set a button to launch an application,
open a document, or open a website.
Note: if the website address you wish to assign to a specific button does
not include "WWW" add "http://" (without quotes) before the website
address. For example, http://support.ati.com.
Application Control allows you to access an application even if it is in
the background. (Supported by iTunes
For example: you can select the next track of an audio CD in iTunes
without bringing the application to the foreground,
Use Defaults changes all programmed buttons to No Action when Global
Profile is selected. When any other profile is selected Use Defaults
changes all buttons to Global Action.
Remote ID allows you to change the Remote Wonder transmission signal ID. Select
the desired number from the menu in the Remote Wonder Control Panel. You must
also change the signal ID on the Remote Wonder. Hold down the drag button
until the red LED starts to flash the current setting. Enter the ID shown in the
Control Panel, using the Remote Wonder number pad. Press the drag button to
apply the change. For example: press 5 in the number pad sets the Remote ID to 5.
The LED will flash the new setting to confirm the change. This should correspond
with the Remote ID shown in the Control Panel.
Note: the default setting for the Remote Wonder is 16. Setting the Remote ID to All
in the Control Panel allows the Remote Wonder to transmit on all signal IDs.
®
and Apple DVD Player
3
®
only.)