Advertisement
3
SETUP
Please refer to the safety instructions included in the product box.
INTERNET
ADSL
4
You can setup your Air 7415B quickly and easily by following the steps
below:
1. Place the batteries provided into the remote controller as shown inside
the battery room.
2. Connect the audio/video outputs of the Air 7415B to the audio/video
inputs of your television using HDMI cable provided with the product.
UHD video resolutions are only possible through the TV's HDMI ports
supporting UHD and HDCP2.2.
3. Connect the Ethernet cable provided with the product to Air 7415B.
4. Connect the power adapter provided to the wall outlet and connect
the other end to your Air 7415B.
5. The "POWER" LED will light up indicating that the unit is now powered
up and ready for operation.
6. In order to display the video from Air 7415B, you may need to change
the settings on your television set so that its input matches to the
television's physical connection to the Set-Top Box.
When you press the "POWER" button on your remote control, the
Air 7415B will go to standby mode.
If you are facing any problems with your device please contact your
Service Provider.
ETHERNET
WIFI
12V
Reset
On/Off
3
2
1
MODEM
A/V Out
S/PDIF
Ethernet
Air 7415B
2
Advertisement
