Example: Programming An Email Alert To Be Sent When Movement Is Detected - Avidsen IPC480-i Instructions Manual

1080p wifi ip camera
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
Video quality settings and number of frames
per second.
Warning: if you set the video quality too
high with respect to the quality of the internet
connection of your camera and smartphone
or tablet, you may experience choppy video
or loss of connection.
Two
streams
can
6
correspond to the maximum resolution
= "résolution Max", and low resolution =
"résolution faible", which you can select from
the live video display.
Warning: in some cases, a change in camera
resolution will only happen when the app is
restarted. Exit and re-launch the Aviwatch
app if there is a problem.
Confi gure the camera's current WiFi settings
7
If a micro SD card has been inserted into the
8
camera, you can reformat it and display its
total and free memory
Setting the date and time stamps on the
9
camera's video
Settings for sending emails in the event of an
10
alert (see the example below)
Settings for saving to an FTP server
11
Restarting the camera remotely/Update/
12
Reset
Camera network information
13
2.2 - Example: programming an email alert to be
sent when movement is detected
To program an alert to be sent when movement
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Confi guration depends on the
chosen email provider's settings.
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself).
In our example, we use
www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com
Both addresses need to have been created
beforehand.
1080P WIFI IP CAMERA
be
adjusted:
they
receives
the
alerts.
D - CONFIGURATION
First, go to "Réglages Email" (Email settings):
iOS
Android
Email: Name that you should enter to log in
to the email box which will send the alerts. In
1
our example using gmail, this is the sender
address:
sender-address@gmail.com
11
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
11
EN
EN
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipc482-iIpc481-ex

Table of Contents