Advertisement
PARAMETER
WFBJ90121/WFBJ90121S
Model
Washing Capacity
9.0kg
Max.spin speed
1200rpm
Net Weight
73kg
Dimension(WXDXH)
595X610X845mm
Rated Voltage
220 -240V
Heating Power
1900W
Washing Power
300W
Add Detergent, Close the Door and Set the Program
Load the clothes to be washed in the drum and close the door.
Add the detergent into the relevant compartments for the type
of program you are going to select, Add detergent as described
in Detergent and Additives section of User's Operation
Manual.
1.Press the "On/Off" button.
2.Rotate the selector dial to the required program.
3.The display window will show the program length (hours :
minutes), temperature, spin speed and additional function
options.
4. Press the "Temp. " button to set the desired wash
temperature and the "Spin" button to select the spin speed.
Prewash
1.Press the "Prewash" button until the Prewash indicator lights
up. Add detergent into the prewash chamber
.
2.The Prewash indicator flashes during the operation. After
the operation finished, the indicator turns off automatically.
Extra Rinse
1. This function is adding maximum 3 rinse times during
washing process.
2. It is suitable for washing baby clothes, or for the people
who are sensible to detergent.
3. Before starting the washing process, press "Extra Rinse"
button. Lighten the "Extra Rinse" indicator; "P-1" indicates
adding extra rinse once, "P-2" indicates adding extra rinse
twice, "P-3" indicates adding extra rinse three times. During
the rinse process, the indicator flashes; after the process,
the indicator is turned off automatically.
Delay Function
Delay function allows to run the machine at the consumers'
convenience, for example, at night when electricity is cheaper.
•Select Delay function after you have selected the program and
other options.
•Press "Spin +Prewash" button for 3 seconds. The Delay icon
will light up and the program will be set. The delay time will
increase/decrease by every time you press "Prewash/Spin"
button.Keep pressing "Prewash/Spin" for more than 1 second,
the delay time will increase/decrease by 1 hour every 0.5 seconds.
The delay time selected must be between 01:00 and 24:00. When
24:00 is selected, the program will be canceled if you press the
"Prewash" button again.
•The delay time must be longer than the wash program length as
the delay time is the time program will finish. For example: if
the selected program time is 02:28, the delay time selected must
be between 03:00 and 24:00.
•After the delay time has been selected, press the "Start/Pause"
button. The display time will start to count down. When the
display time is down to the program length, the Delay icon will
go out. The program will start.
•To cancel the delay time during the delay program, you need
turn the machine off by pressing "On/Off" button for 2 seconds.
•The Delay function is not available for some programs,
e.g."Rinse + Spin, Spin".
To Start the Program
After you have selected your options and placed detergent
withinthe detergent dispenser, turn on the water tap and press
the "Start / Pause" button. The screen will display the current
program progression with icons from left to right. It also
displays the remaining program time.
End of the Program
When programme finished its running, it will display "End".
If no operation is taken in 30 seconds, the machine will turn
off automatically.
1.Press "On/Off" button for 2 seconds to turn off the machine;
2.Close the tap;
3.Open the door and take the washed clothes out;
4.Slightly open the door to remove moisture in the pump.
To Cancel the Program or Reselect the Options
1.Press the "On/Off" button for 2 seconds to shut down the program.
2.Press "On/Off" button to turn on the machine. Select the new
program and options.
3.Press "Start / Pause"to start the new program without adding
any extra detergent.
Mute Function
When the machine is in the state of holding, pause or operation,
press "Extra Rinse + Prewash" buttons for 3 seconds, the Mute
icon will light up. All the buzzing will be turned off except the
alarms.
When the machine is in the mute state, press "Extra Rinse +
Prewash" buttons for 3 seconds, the Mute icon will turn off. All
the buzzing will be activated.
Child Lock
To strengthen the safety of children, this machine is equipped
with Child Lock function.
When the programme starts, press "Temp. +Spin" button
for 3 seconds. Child Lock icon will light up, and then Child
Lock is set up. Repeat the same operation, the Child Lock will
be released.
•When the Child Lock is set, all function buttons will be
shielded.
•When you turn the machine off by pressing the "On/Off"
button, child lock is released.
Door Lock Icon
After the program starts the Door Lock icon will light up and
the door will be locked.
•The door is always locked when a program is running. It is
not possible to open the door while the icon is flashing. Trying
to forcibly open the door will cause damage to the appliance.
•If you wish to open the door due to an emergency you must
press the "Start / Pause" button. It is important to check the
spin speed of the drum, the level of the water inside the drum,
and the temperature of water, before trying to open the door.
•If the door would not open after 2 – 3 minutes you can select
the spin program to drain the water from the drum. Switch off
the appliance and open the door.
Safety Notice: If the program is interrupted during the wash,
the temperature of the items inside, and the drum, may be.
very high. To avoid any scalding, or burns, care must be taken
before removing any clothes from the drum.
Tap Icon
Inlet Water Tap Icon Lights Up.
If the appliance detects that no water has entered the drum, the
Tap icon will light up. Make sure the water tap is turned on and
press the "Start / Pause" button. If the icon still lights up,
please refer to the User's Operation Manual Troubleshooting
Guide.
Draining Pump Icon
The Draining Pump Icon Lights Up.
If the appliance detects that water in the drum has not been
drained up, the Draining Pump icon will light up. Please
make sure before the drainage process starts, the water in
the drum has been cool down, the drain hose has not been
frozen, knotted, or blocked, and the draining pump filter has
not been blocked.
After all the checking, please press "Start/Pause" button. If
the Draining Pump icon still lights up, please unplug the
washing machine, and contact the After-Sales Service
department.
Reload in Process
If you want to reload clothes in the process of washing, please
press "Start/Pause" button.
•If the door can be opened in the process, remaining time and
the Door Lock icon in display will flash. After 2 - 3 minutes,
the Door Lock icon will go out, and the door can be opened.
•If the Door Lock icon doesn't flash, it indicates that current
temperature is over 50℃ or you have passed the time for
reloading in the process, namely no clothes allowed to load
into the machine.
Programme Instructions
1. The standard 60℃ and 40℃ cotton programmes,referred to
as 'standard 60℃ cotton programme' and 'standard 40℃ cotton
programme',and that they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes
in terms of combined energy and water consumptions for
washing that type of cotton laundry,in addition,the actual water
temperature may differ from the declared cycle temperature.
2. The power consumption of the off-mode is 0.49W,and of
the left-on mode is 0.49W.
3. The type of detergents suitable for the various washing
temperatures.
4. The information of standard programmes:
Main Wash
168
198
Duration (Min)
Programme
210
240
(Min)
Energy
Consumption
0.80
1
(kWh)
Water
Consumption –
13.6
13.6
Main Wash (L)
Total Water
38
38
Consumption (L)
Remain moisture
53
53
content (%)
X08080371A
198
240
0.93
19.4
54
52
Advertisement
