Cleaning Instructions; Helpful Hints When Juicing - ACME SUPREME JUICERATOR 6001 User Manual

CLeanIng InStruCtIonS

• Follow disassembling instructions.
• Use cool or cold tap water when washing.
• The pusher, cover, juice bowl, and clutch require only rinsing.
• Cutter blade should be washed under running water, using a stiff brush.
• After removing most of the pulp from strainer basket using a spoon, your
hands, or the disposable filter, hold strainer basket under cold running
water while you brush the strainer basket holes from the outside. After the
holes are clean, take a damp sponge or towel and wipe out the remaining
particles. All stainless steel parts are dishwasher safe. Plastic parts may be
placed on top rack of dishwasher.
• Assemble dry parts – put away for next use.
note: In case mineral stains appear after repeated use, soak the cover, juice
bowl, strainer basket, cutter blade, and clutch overnight in cold water into
which Cascade detergent (8 tablespoons to a gallon of water) has been
dissolved. Make sure all parts soaking are completely covered with water.

HeLpfuL HIntS WHen JuICIng

The Acme Supreme Juicerator
hints will help you get optimum performance.
• Vegetables should always be fresh and crisp.
All fruits and vegetables should be fed into the
feed chute as illustrated in Figure 2. Feed all
vegetables in the largest pieces possible. With
hard fruits and vegetables (carrots, beets,
celery, etc.), we recommend feeding through
using a hard, pulsating uneven motion.
• With softer fruits and vegetables such as apples
we recommend a slow, continuous even motion
when pushing down the feed chute to allow for
the skins to be torn apart completely.
• The Acme Supreme Juicerator
type juicer and by following the instructions
above you can avoid having the Juicerator
vibrate. However, if you do experience some vibration, the
strainer basket has become imbalanced through over juicing or
improper introduction of food material. Stop juicing, unplug and empty pulp.
is a precision made machine and the following
®
is a centrifugal
®
®
4
Figure 2