Advertisement
1
• Disconnect all electrical power to the unit. Slip heater around
the compressor casing and position close to the bottom.
3
• Connect black wires to power and neutral, and the green
wire to ground.
NORTH AMERICA
Tel: +1.800.545.6258
Fax: +1.800.527.5703
Tel: +1.650.216.1526
Fax: +1.650.474.7711
thermal.info@pentair.com
Pentair and FreezGard are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the
right to change specifications without prior notice.
© 1997-2016 Pentair.
THERMAL BUILDING SOLUTIONS
EUROPE, MIDDLE EAST, AFRICA
Tel: +32.16.213.511
Fax: +32.16.213.603
thermal.info@pentair.com
EN-RaychemFreezGardCrankCase-IM-H55593 06/16
2
• Feed adjusting strap through ratchet end and hand
tighten to secure heater to casing.
CAUTION: Do not use excessive force or strap may break.
ASIA PACIFIC
Tel: +86.21.2412.1688
Fax: +86.21.5426.2917
cn.thermal.info@pentair.com
WWW.PENTAIRTHERMAL.COM
LATIN AMERICA
Tel: +1.713.868.4800
Fax: +1.713.868.2333
thermal.info@pentair.com
2 / 2
Advertisement
