Download Print this page

iData HDMI-KVM2 User Manual

Hdmi kvm extender over network cable

Advertisement

Quick Links

NOTE:Point to multi-point connection via switch is supported too,but under point to
multi-point configuration, it is strongly recommended to operate KVM function on
one receiver only at the same time.
5.Switch Connection
Transmitter TX
HDMI
cable
USB
Switch*N
Switch
PC
Receiver RX
TV
keyboard/mouse
NOTE:Transmission distance depends on type of network cable,
CAT5:80m,CAT5E:100m, CAT6:120m.
FAQ
Q:Yellow light of Lan port is flashing but slowly?
A : 1) : Check whether HDMI Extender Transmitter and HDMI Extender
Receiver is reversed.
2): Check whether HDMI source device output HDMI signal correctly.
3): Change the HDMI cable of Transmitter.
Q: Yellow light of Lan port is flashing quickly but no display?
A: 1): If HDMI source is graphics card, please set the resolution to be
supported by display .
2) : Check whether HDMI cable of Receiver is well connected.
3): Change the HDMI cable of Receiver.
Q: Yellow Led light of Lan port is not light?
A: 1): Check connection of network cable.
2): Network cable is too long.
Q:Abnormal color display or flashing after all the devices are well
connected?
A:1): Pls press reset button of HDMI extender.
2): Make sure the network cable is made according to the
standard of IEEE-568B.
Q:USB does not work?
A:Re-install the driving software,check and make sure the USB cables
are connected well, then reset Transmitter or Receiver.
Specification
Items
Specifications
HDMI 1.3
HDM version
HDCP version
HDCP1.2
Video bandwidth
≤70Mbps
640*480@60Hz
800*600@60Hz
1024*768@60Hz
HDMI resolution
1280*720@60Hz
1360*768@60Hz
1440*900@60Hz
supported
1400*1050@60Hz 1680*1050@60Hz 1920*1080@60Hz
Audio support
PCM (44.1KHz, 48KHz)
HDMI connector
Type A ,19 pin, Female
RJ-45
LAN connector
Operation temperaure
0℃〜50℃
10-95% (Noncondensing)
Relative humidity
Power supply
5V/1A*2pcs
Power Consumption
TX<3.5w
RX<3.5w
Dimensions
109.6(L)x89.5(w)x26.3(H)mm*2pcs
Weight
TX:160g
RX:170g
Color
black
Disclaimer
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference,and there may
be some slight difference with the real products.
We reser ve the rights to make changes without further notice to a
product or system described herein to improve reliability, function
or design.
HDMI KVM EXTENDER over Network Cable
U s e r M a n u a l

Advertisement

loading

Summary of Contents for iData HDMI-KVM2

  • Page 1 NOTE:Point to multi-point connection via switch is supported too,but under point to Q:Abnormal color display or flashing after all the devices are well multi-point configuration, it is strongly recommended to operate KVM function on connected? one receiver only at the same time. HDMI KVM EXTENDER over Network Cable A:1): Pls press reset button of HDMI extender.
  • Page 2 Package Content Panel Introduction Installation Procedures Important Safety Instruction 1.How to make a CAT5E/6 network cake 1. Do not mix up the transmitter and receiver before instruction 1.HDMI EXTENDER TX (Transmitter) Follow the stanard of IEEE-568B: 2. Do not unplug the device ,when it is in using,keep distance from 7- Brown/white 1- Orange/white 4- Blue...