Advertisement
QUICK381A
Vacuum Pick-up
Operation Manual
Thank you for purchasing a Vacuum Pick-up. Please read this manual before
operating the unit. Store this manual in a safe, easily accessible place for future
reference.
Advertisement
Table of Contents
Summary of Contents for Quick QUICK381A
- Page 1 QUICK381A Vacuum Pick-up Operation Manual Thank you for purchasing a Vacuum Pick-up. Please read this manual before operating the unit. Store this manual in a safe, easily accessible place for future reference.
- Page 2 SECTION 7 Replaceable parts SECTION 1 General Description 1. Replacing the fuse. The unit is designed for picking up SMD elements, chips, resistors, condensers and 1) Pull the power plug out of the power socket. other mini components or articles. Easy to operate. With the built-in air pump, it is 2) Take out the fuse holder on the rear side of the unit by screwdriver.
- Page 3 components. Suction nozzle/Suction pad Suitable type * Suction nozzles and pad can be used together, and interchangeable. Straight suction nozzle (0.7mm) SMD elements, chips, resistors, condenser and other mini components or articles. Straight suction nozzle (1.45mm) Small IC (8~40 pins) SECTION 4 Installation Straight suction nozzle (0.7mm)+ IC (14 pins or above)
Need help?
Do you have a question about the QUICK381A and is the answer not in the manual?
Questions and answers