Congratulations on choosing the innovative Climate Control Sleep System. Get ready to enjoy personalized climate control that will improve your overall comfort and sleep quality. If you have any questions while setting up or using your bed, please visit www.gentherm.com/ccss Table of ConTenTs ADVISORY......... INSTALLATION.......
advisory P LE A SE RE A D THE FOLLOWING INFORMAT I ON C AREFU LLY BEFOR E USING THIS PRODUCT . P LE A SE S A vE TH ESE INSTRUCT IONS. As with all electrical products, the misuse of this product or failure to properly follow the instructions may cause overheating, fire, or personal injury.
Page 4
Modifications made to the product, unless expressly approved by Gentherm, could void the user’s authority to operate the equipment. CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation.
insTallaTion Before You Begin: Check the contents of the electronic kit box. It should include: Plastic tubes for air flow (4) Warranty registration card Power Cord Instruction manual Four (4) AAA batteries Remotes (2) Main Control Unit (MCU) BEDDING CONSIDERATIONS Decide on a location for your new bed.
Page 7
BED SET UP Extension (optional) Note: • Cords exit the interlay from the head of the bed. • Queen interlay cords exit from the outside edge of the interlay from the head end of the bed. • It is recommended that a surge protection device (not included) is used between the MCU and the outlet.
Page 8
• There are eight (8) holes in the underside of the mattress with eight plastic inserts covering each hole. Four (4) of these holes are designed to fit over the posts of the interlay. The extra set of holes on the mattress is to account for rotation of the mattress. •...
Page 12
ADJUSTING HEAT/COOL SETTINGS Low Heat Ventilation Hi Cool (no heat or cool) Note: Humidity - The Climate Control Sleep System continuously moni- tors room humidity in the room environment. If the humidity levels are above normal, the system will operate at reduced performance to insure that no condensation occurs.
System (“Unit”). This warranty begins on the “Warranty Commence- ment Date”, which is either (A) the date of purchase for new, unused units from Gentherm or (B) the date of manufacture of units that have been used by Gentherm as floor or display models. If original...
Page 19
Warranty Commence- ment Date (the “One Year Limited Warranty Period”). Upon written notice of defect received by Gentherm from the Purchaser during the One Year Limited Warranty Period, Gentherm will, upon return of the defective part(s) from the Purchaser to Gentherm in accordance with Gentherm’s written instructions, deliver replacement part(s)
Page 20
Gentherm’s obligation with respect to replacement cost would be sub- ject to return of the defective part(s) from the Purchaser to Gentherm in accordance with Gentherm’s written instructions and the Purchas- er shall be responsible for all shipping costs associated with return...