Replacing Bulbs - Mercedes-Benz 300SD 1981 Owner's Manual

Electrical System

Replacing Bulbs

Only handle new bulbs for headlamps
and tail lamps with tissue paper or
similar. Install only bulbs of pre­
scribed wattage. Refer to " Technical
Data and last page''.
Headlamp Aiming
Correct headlamp aiming is of para­
mount importance to the roadworthi­
ness of the car. Check and readjust
headlamps at regular intervals and
invariably when a lamp has been
replaced.
19425
Headlamp Unit
1 Headlamp vertical aiming screw
2 Headlamp horizontal aiming
screw
3 Fog lamp vertical aiming screw
4 Fog lamp horizontal aiming screw
5 Securing screw for housing of
turn signal, standing, side marker
and parking lamps
j 9426
6 Securing screw for cover of
sealed-beam unit/halogen and
fog lamp
7 Sealed-beam unit/halogen
8 Securing screws for sealed-beam
unit/halogen
9 Fog lamp
10 Securing screws for fog lamp