Table of Contents
Advertisement
Congratulations on your purchase of the
Infrared Thermometer. The compact size
lets you get into tight places while its
convenient laser targeting and high
distance to spot ratio (D:S) gives you
accurate readings on distant targets.
Precise non-contact Measurements
Switchable C/ F Temperature units
Automatic Data Hold
Laser target pointer
The meter provides a simple one hand
operation, time saving to get temperature
measurement. Be sure the measured
object fills the "spot" seen by the
aperture.
There will be a delay of approximately
one-second between the time you
initially press the trigger and the time
the display comes on.
Not recommended to use in any shiny
surfaces and measure the object which
is smaller than the targeting area.
To avoid thermal shock and do not store
the meter below freezing.
The meter is pre-set to measure objects
with an emissivity of 0.95 ( models
8888/8890).
3 emissivity points 0.85, 0.90, 0.95 are
selectable for model 8889.
o
o
Advertisement
Table of Contents
