Bolide iPac Series Setup Manual

QUICK IP CAMERA SETUP GUIDE
START HERE
!
IMPORTANT:
Check power and
voltage to prevent
damage. Please use
only 12VDC 1000mA
or POE to power the
camera. In order to program
the IP camera, you need a computer con-
nected to the same network as the camera.
EASY SETUP STEP 1 - 2 - 3
1
Plug in the power to the camera 12VDC or POE.
Plug in the Ethernet cable to the camera.
OR
2
Plug in the cable to a network hub
and connect to your computer.
Need More Help?
For information about features, please refer to the user manual for example settings and definitions. Additional product information can also
be found in the Product Manual on the CD. Please feel free to give us a call or simply log on to http://www.bolideco.com for more information
and support.
POE
Connection Diagram
Local Network Video Management Software
Modem/Router
LAN / Local Area Network
3
Open Internet Explorer, type in the default IP address in
the address bar:
http://192.168.0.120
Login: admin
Password: admin
For additional IP cameras, simply assign different IP once
you have logged on.
*If you encounter IE Active X error, please go to internet
options > enable all Active X control under security set-
tings. Please also make sure your computer is set to the
same network mask.
Remote Network Video Management Software
Internet / WAN
Modem/Router
LAN / Local Area Network
Modem/Router
LAN / Local Area Network
Bolide Technology Group
is a ISO 9001:2008 Certified Corporation