Advertisement
Quick Links
Connecting Your ENM-04/08 POE
ENM-04 does not have Alarm IN / OUT
720P/1080P VGA*
Simultaneous Display
720P/1080P HDMI*
Simultaneous Display
Package Contents:
NVR (X1)
WatchNET Products are subject to continuous changes and
improvements, information on this document is subjected to
change without prior notice.
2015 WatchNET Inc. © All Rights Reserved
Smart Phone*
IE / Client for Windows or MAC Client for OSX
Cameras
Remote Control (x1)
Software CD (X1)
NOTE:
Cameras included only
in KIT Models and may vary from
KIT Model numbers
* Not included/sold separately.
Power Cable (X1)
Speaker*
Microphone*
USB Mouse
LAN / WAN
Free DDNS
www.dvrid.com
Mouse (X1)
Power Adaptor (X1)
E thernet Cable (X1)
Quick Start Guide
Mouse Pad (X1)
QUICK CONNECTION GUIDE
PoE IP Cameras
Typical 16 Camera connection
with built-in 8 Port POE NVR & 16 Port Switch
Router*
POE Cameras
NOTE:
1. External 12 or 16 Port POE Switch is needed to connect the additional 8 cameras.
(If using regular switch, the cameras must have 12V 1Amp Power Source connected)
2. Launch the Config tool from the software CD and assign IP Address to cameras to suite the
local LAN configuration.
3. Please see hardware manual on the software CD for more instructions.
110V AC / 240V AC
PoE
48 Volts Power
LAN
ENM 16 POE*
Advertisement
Related Manuals for WatchNet ENM-04 POE
Summary of Contents for WatchNet ENM-04 POE
-
Page 1: Package Contents
NOTE: 1. External 12 or 16 Port POE Switch is needed to connect the additional 8 cameras. WatchNET Products are subject to continuous changes and Cameras included only (If using regular switch, the cameras must have 12V 1Amp Power Source connected) - Page 2 EASY START-UP WIZARD Step Step Step Login System Settings Network Systems Default Adjust the time and date. Click "Save" before moving to the next step. Change the default network to match the local network. Ask the network Username: admin administrator for the proper IP address, Gateway and Subnet Mask. Save Date &...