Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ackton Precision Park P5000 Series
- Page 1 P5000 Series Owners Manual 12/16/04 5:16 PM Page 1 Owners Manual...
- Page 2 Please take the time to read the manual carefully before installing, as we want you to be as proud of your installation, as we are of the product. Thank You, for your purchase and safe motoring, From all of us at Ackton Inc. Precision Park Limited Warranty This Warranty covers defects in workmanship and materials for a period of twelve (12) months from date of purchase.
-
Page 3: Function Specification
P5000 Series Owners Manual 12/16/04 Function Specification The Precision Park 5000 system consists of four ultrasonic sensors, one control unit, one wiring harness and one display/speaker. The sensors operate both as transmitters and as receivers, which send an ultra high frequency sound wave (sonar) that is reflected off an object and received. -
Page 4: Installation Instructions
P5000 Series Owners Manual 12/16/04 Installation Instructions Material and Tool Check Insur e that all of the components are in the kit, they include: Sensors ( 4) Control Module (1) Display & Cable (1) Velcro Pad Cable Ties (10) Manual... -
Page 5: Sensor Installation
P5000 Series Owners Manual II. Sensor Installation Sensor installation will depend on the sensors supplied with the system either flush mount or surface mount. Locate your sensor type from the sensors below. flush mount NOTE: The driver's side is considered the left side of the vehicle. - Page 6 P5000 Series Owners Manual Surface mount Sensors may be mounted below or above the bumper. To protect the rear corner of the vehicle, mount sensors within 1' from the edge. Place the sensors at the desired locations and mark drill holes with a felt tip marker.
- Page 7 P5000 Series Owners Manual Prior to drilling check the underside of the bumper to be certain that there are no wires or items that may be damaged by the drill bit. Leave the tape on when drilling to reduce any chipping of the paint that may...
-
Page 8: System Check
P5000 Series Owners Manual Attach sensor cable extensions and cable tie the sensor cables to conceal. Be certain the cables will reach the control module then fasten the control module using the screws provided. Attach the sensor cables to the control module. -
Page 9: Complete Installation
P5000 Series Owners Manual 0-2F 2-4F 4-6F NOTE: All measurements are approximate. Due to an objects position, angle, size or shape, the reflected signal may mislead the receiving sensor. For a better understanding we suggest that you test your vehicle with different objects for a better understanding of the systems capabilities. -
Page 10: Troubleshooting Guide
P5000 Series Owners Manual 12/16/04 Technical Data CONTROL BOX ITEM SPECIFICATION Specified voltage Operation voltage DC10.8~15V range Standby current Below 100MA Operating current Below 200MA Operating Temperatur e Storage Temperatur e Operation 40KHz ± 2KHz frequency Trouble-Shooting Guide PROBLEM System does not... - Page 11 P5000 Series Owners Manual 12/16/04 Obstacles may not be detected Due to the obstacle's position, angle or size, the reflected signal may not reach the receiving sensor . Complex reflec- tions may also occur in a complex environment causing inaccurate detection. See examples 1, 2, 3, 4, 5 and 6.
-
Page 12: Important Notice
P5000 Series Owners Manual 12/16/04 Important notice! 1). Precision Park is strictly meant as a drivers aid when parking or backing up your vehicle. Not all objects will your sensors, therefore you must exercise caution and common sense when reversing your vehicle.
Need help?
Do you have a question about the Precision Park P5000 Series and is the answer not in the manual?
Questions and answers