Download Print this page

Enabling Devices 7083 User Manual

4 x 5 communicator for the visually impaired

Advertisement

Quick Links

Changing Message Fields: : : :
Changing Message Fields
Changing Message Fields
Changing Message Fields
Pressing message cells 2 & 8 simultaneously will reduce the message cell
by one, each time you press the two cells together another cell with be
removed (minimum setting is two Cells). Please Note:
is all 8 cells if you make any changes during use; they are not saved when
the communicator is turned OFF. The unit will reset to the default setting
when turned back ON.
Icon Inserts: : : :
Icon Inserts
Icon Inserts
Icon Inserts
The communicator uses clear transparency or standard printer paper to
make the icon inserts that you can print from your computer. The icon or
picture holder uses 4" x 5" icons.
Headphone Use: : : :
Headphone Use
Headphone Use
Headphone Use
Special feature allows you to choose one of three broadcast options:
speaker only, headphones only, or speaker and headphones
simultaneously. When using a set of headphones, set the toggle switch to
Headphones Only (only the user will hear message playback) or to
Headphone & Speaker. The Communicator can be used with any standard
set of head phones used with a walkman type player or MP3 player.
To prevent battery drain, always shut the communicator OFF when not in
use. The two built in switches have LED lights which will drain the batteries
if unit is left on. Always remove batteries when the unit will not be used for
extended periods of time. Dead batteries often leak acid and can cause
permanent damage to the communicator.
Precautions
Precautions: : : :
Precautions
Precautions
Always keep liquids far away from the communicator to prevent
permanent damage to the internal circuitry from spillage.
For Technical Support:
For Technical Support:
For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Please Note:
Please Note: The default setting
Please Note:
4 x 5 Communicator for the Visually
Impaired #7083
USER'S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7083 and is the answer not in the manual?

Questions and answers

Summary of Contents for Enabling Devices 7083

  • Page 1 8 cells if you make any changes during use; they are not saved when 4 x 5 Communicator for the Visually the communicator is turned OFF. The unit will reset to the default setting when turned back ON. Impaired #7083 Icon Inserts Icon Inserts: : : : Icon Inserts...
  • Page 2 Large illuminated targets! Large illuminated targets! Large illuminated targets! Large illuminated targets! Playing Messages: : : : Playing Messages Playing Messages Playing Messages Our state-of-the-art communicator for the visually impaired has large, At this time, you can access each of the eight messages on Level One by brightly illuminated targets for activating your message choice.
  • Page 3 Scan Mode 1: Inverse scanning. Plug a capability switch into Jack 1 Scan Mode 1: Cueing ON or OFF, press the AUD. ON/OFF button located on the Scan Mode 1: Scan Mode 1: located on the rear of the communicator (or use built in switch). Press and underside of the unit.