Example of trunk and spur topology
To other
floors
DDNG485
Network Gateway
DDNG485
DDNG485
Network Gateway
DDNG485
To other
floors
RS485 DyNet network
Recommended Cable Type
Dynalite DYNET-STP-CABLE or equivalent shielded
three twisted-pair.
See datasheet for more information.
Product Specifications
Input Voltage:
RS485 Serial Port 1:
RS485 Serial Port 2:
Serial Port Isolation:
RS485 Data Formats:
Output Terminals:
User Controls:
Internal Controls:
Operating Conditions:
Storage & Transport:
Construction:
Dimensions:
Packed Weight:
Certification:
Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333
DDRC820FR-GL
DyNet Spur
DDRC820FR-GL
DyNet Spur
12 VDC max, 375 mA from the DyNet network (port 1)
1 x RS485 unterminated, consisting of 1 x 6 way terminal block
1 x RS485 unterminated, consisting of 1 x RJ12 socket & 1 x 5 way terminal block
Opto Isolated to 3.75 KV
DyNet, DyNet II, DMX512 Receive 64 channels
Supported Baud rates: 1200 - 460800
12 x DALI, 0-10V, DSI driver circuits: DA+, DA-
conductor size 0.2 - 5mm
2
Service switch, Diagnostic LED
Programmable Logic Controller, 64 tasks
Temperature: 0 to 50° C ambient
Humidity: 0 to 90% non-condensing
Temperature: -25 to 60° C ambient
Humidity: 0 to 90% non-condensing
Polycarbonate DIN rail enclosure
95 mm x 105 mm x 75 mm (3.8" x 4.1" x 2.9")
0.25 kg
CE, RCM
DDNG485 Installation Instructions Rev 10 Specifications subject to change without notice
E-Mail: support.controls@philips.com
DDRC820FR-GL
DDRC820FR-GL
Recommended Cable Color Coding
Green/White Pair
Orange/White Pair
Blue/White Pair
Brown/White Pair
(24 - 10 AWG)
Web: http://philips.com/dynalite
Sensor
Sensor
DUS360CR
DUS360CR
To up to 59 more devices
Sensor
Sensor
DUS360CR
DUS360CR
To up to 59 more devices
Paralleled for GND
Paralleled for +12VDC
Blue for DATA+
White for DATA-
Spare, use for SHIELD on unshielded cables
Shield
Green/Green white
Blue
Blue white
Orange/Orange white
Brown/Brown white