Suicen SX-990 Quick Manual

Before charge this headset with charging cable, please check whether the
charge cable is original.
Please choose a proper volume when hearing the headset. It is also important
charge
to control the hearing time for your ears health.
If the environment is potentially dangerous, please stop using the headset
When there is an incoming call, headset will broadcast the phone number with
SX-990 vibration. Double click the MFB to reject or just reject it on your mobile phone, it
will prompt" Call rejected ".
SX-990
Pairing time exceeds 3 minutes, SX-990 will automatically shut down ;If the
headset are back to the effective distance in 3 minutes, it will automatically
reconnect with the last connected device.
Double click the volume" –" when calling to have call transferred between
phone and headset.
Unlock the mobile phone and double click the volume " - " to launch the voice
dial, it will prompt" Voice Dial" , and then just speak the people's name who you
When there is an incoming call, the headset will prompt: Incoming call" with want to call, This function only works if your mobile phone support it.
vibration. Phone number"134........."will be broadcasted. Click MFB to answer
or just operate on your mobile phone.
Press the MFB button to hang up calls, or directly hang up on your mobile phone,
it will prompt" Call ended".
1. Switch the button to:"ON", the headset will turn on with vibration and
prompt "Power On" the red and blue indicator light are flashing alternately
better
which means the headset is entering into pairing mode and prompt" Ready
to pair".
Mobile phone lost indicator with headset
When the headset is connected with smart phone, if the distance between
device and headset is out of 10 m, headset will prompt "Device disconnected"If
comes back to the working distance within 3 min, headset will reconnect
automatically with your mobile phone. If not comes back around working
distance in 10 min, headset will power off, Please switch the button to OFF and
then to ON to wake up the headset to back to work.
Battery low
2. Switch to "ON", it will prompt " Ready to pair " after 5 Seconds ,the red and
blue lights flash alternately when headset is ready for paring . Bluetooth Earphones
SX-990
4. Click SX-990, Bluetooth headset gets connected with your device
automatically, and prompt" Pairing completed" and also will prompt" Device
connected" when successfully connected with SX-990. Some may require pass
code which is 0000.
SX-990
SX-990
SX-990
B l u e t o o t h E a r p h o n e s B l u e t o o t h E a r p h o n e s SX-9B l u e t o o t h E a r p h o n e s B l u e t o o t h E a r p h o n e s 9 0B l u e t o o t h E a r p h o n e s
SX-990
FCC ID:UHBSX-990