Advertisement
Quick Links
TROUBLESHOOTING
Wirepath™ structured wire modules are designed to function trouble-free. Most problems
that occur are due to simple issues. If you have trouble, please check the list of simple fixes
below. If the problem persists, contact your authorized Wirepath™ dealer or Wirepath™
customer service at 866.838.5052.
No Telephone signal
• Verify that there is signal on the input being used.
• Check all wiring connections on output(s) with no signal, including any wall-plate
connections at the remote location.
• Disconnect RJ-31X cable if this option is being used. Retry operation.
• Check jumper wire from WP-MOD-RJ45-TEL1X12 if the only trouble is with locations
connected to the WP-MOD-TELEP16.
Lifetime Warranty
All Wirepath™ products have a Lifetime Limited Warranty. This
warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal
conditions of use. This warranty shall not apply to products which
have been abused, modified or disassembled. Products to be
repaired under this warranty must be returned to SnapAV or a
designated service center with prior notification and an assigned
return authorization number (RA).
For Technical Support: 866.838.5052
®
INSTALLATION GUIDE
TELEPHONE MODULES
INTRODUCTION & FEATURES
2
2/3
INSTALLATION
4
SPECIFICATIONS
>> WP-MOD-RJ45-TEL1X12
>> WP-MOD-RJ45-TELEP16
Advertisement
Related Manuals for Wirepath WP-MOD-RJ45-TEL1X12
Summary of Contents for Wirepath WP-MOD-RJ45-TEL1X12
- Page 1 • Disconnect RJ-31X cable if this option is being used. Retry operation. >> WP-MOD-RJ45-TELEP16 • Check jumper wire from WP-MOD-RJ45-TEL1X12 if the only trouble is with locations connected to the WP-MOD-TELEP16. TELEPHONE MODULES Lifetime Warranty All Wirepath™...
- Page 2 Brown If the Wirepath™ module is being used in an enclosure of another brand, it may be necessary to use one of the included spare mounting pins in the extra mounting flange hole and remove the two pins on that...