Advertisement
Quick Links
Installation Instructions for 81952
Lithium Jump Starter
with Automatic Voltage Detector
WARNING
Read, understand and follow all instructions, cautions and warnings listed in this instruction manual, those
•
published by your vehicle battery manufacturer & manufacturers of any device intended to be used with this unit.
Failure to follow all instructions and abide by all cautions and warnings could result in personal injury, injury to
others and property damage. Save these instructions for future reference.
Use this product with 12V& 24V lead-acid batteries only. DO NOT connect to 6V DC batteries.
•
DO NOT use with dry-cell batteries, these batteries may burst and may cause injury to person or damage personal
•
property.
Never charge or jump-start a vehicle with a frozen battery.
•
DO NOT face battery. Stay as far as possible from vehicle battery being jumped when making final connection.
•
Working around lead-acid batteries may be dangerous. Lead-acid batteries generate explosive gases during
•
normal charging and jump-starting operations.
All lead-acid batteries (car, truck & boat) produce hydrogen gas, which may violently explode in the presence of fire
•
or sparks. DO NOT smoke, use matches, lighters or open flame near batteries.
DO NOT operate this device or place this product near flammable materials or any location, which accumulate
•
flammable fumes.
Do not submerge in water, or expose unit to heavy moisture or rain.
•
This product is not intended for use in the rain or temperature above 140° F.
•
Some late model vehicles have on-board computers that might be damaged if jump-started. Always read the
•
vehicle owner's manual before attempting to jumpstart (battery boost) the vehicle to determine if external-starting
assistance is acceptable.
Stay clear of fan blades, belts, pulleys and moving parts that can cause bodily injury during battery jump-start.
•
1-800-345-4545 jegs.com
Advertisement
Related Manuals for Jegs 81952
Summary of Contents for Jegs 81952
- Page 1 Installation Instructions for 81952 Lithium Jump Starter with Automatic Voltage Detector WARNING Read, understand and follow all instructions, cautions and warnings listed in this instruction manual, those • published by your vehicle battery manufacturer & manufacturers of any device intended to be used with this unit.
- Page 2 LED Light: Provides long lasting portable lighting with 75%, & 100% indicators, LED battery charge status emergency flasher functions 12V & 24V Manual Buttons: Manually Select between Convenient Charge Cord: 120V AC charger for in home 12V & 24V batteries 1-800-345-4545 jegs.com...
- Page 3 Store in cool, dry, well ventilated area with overhead cover. This unit may be stored in any position. Ensure that the booster clamps are secured to their storage holders. NOTE: Jump starter output & power buttons must be in the off positions. If not used for prolonged time, recharge every 3 months. 1-800-345-4545 jegs.com...
- Page 4 NOTE: Excessive engine cranking can damage vehicle starter motor. If the engine turns, but fails to start after several attempts, other technical problem(s) might be involved. Discontinue cranking the engine until the other problem is determined and corrected. 1-800-345-4545 jegs.com...
- Page 5 4. Once finished charging device, unplug cable from USB port & press power push-button until LEDs turn off. NOTE: Make sure device power/charging cable works prior to use. Make sure all connections are correct to USB port and device port. 1-800-345-4545 jegs.com...
-
Page 6: Troubleshooting Guide
140° F operational temperature. Place unit in a well ventilated area temperature. to cool the battery. 12V or 24V LED 1. Normal operation. 1. Press 12V or 24V output button until they turn light stays off. illuminated after jumpstarted vehicle 1-800-345-4545 jegs.com...