Removing The Earphones; Changing Sleeves - Shure SE215-BT1 Instructions Manual

SE215-BT1 Shure Bluetooth Earphones
Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone
deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.

Removing the Earphones

Grasp the body of earphone and gently twist to remove.

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.
• Slide on a new sleeve so that it completely covers the barb and the
nozzle.
2/7
Note: Do not pull on cable to remove earphone.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not prop-
erly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure
proper fit and performance, use only sleeves supplied by Shure (unless using
custom molded sleeves).
Shure Incorporated
2017/11/02