Operation; Indicator Leds - Black Box AC300A-RX-R2 Manual
Video and stereo audio fiber optic transmission system, supports composite, s-video, component, progressive scan dvd, and 480p hdtv video formats with up to two channels of audio, uses digital encoding for high-quality, noise-free
transmissions
Table of Contents
Advertisement
4. Operation
4.1 Indicator LEDs
The system has integral indicator LEDs that are used to monitor the state of the
units. Transmitter and receiver units each feature one Video LED, one Audio LED
and one Power LED, shown in Figure 4-1. Table 4-1 explains each LED's functions.
Transmitter and Receiver
LED
Color/State
Power
Green/ON
Video A
OFF
ON
Video B
OFF
ON
Video C
OFF
ON
Audio
OFF
BLINKING
AC300A-RX-R2
Power
LED
Figure 4-1. LEDs on the transmitter and receiver.
Table 4-1. LEDs and their functions.
Description
Indicates that correct power has been applied.
Indicates no video detected on the input
Y-Video BNC connector.
Indicates video detected on the input Y-Video
BNC connector.
Indicates that no video is present.
Indicates that video is present.
Indicates that no video is present.
Indicates that video is present.
No audio detected on input audio connector.
Audio detected on input audio connector.
724-746-5500 | blackbox.com
Audio
LED
Video A, B,
and C LEDs
Chapter 4: Operation
Page 17
Advertisement
Table of Contents
