Yoo YX2500 User Manual

Welcome to YOO!
YOO is an easy to use
Activity Tracker that
records every step you
take during the day and
syncs with your smart
phone where you can
view other stats like
distance-traveled,
calories-burned and
points-earned in the
.
YOO Challenge
Now let's get
started....
YOO® User Guide
YOO™ is a trademark of YOO Fitness, LLC. All rights
Reserved. ©2014. All other trademarks are the property of
their respective owners.
U.S and International patents pending.
Product ID: YX2500/YX2700
STEP 1: Activate YOO®
YOO is in SNOOZE MODE.
To activate:
a
Remove the ba ery from
the packaging.
Place your thumb and
b
forefingers on the top and
bo om sides of YOO and
twist to open.
Once open, insert the
c
c
ba ery as shown in the
image. The side that
shows the "+" symbol
should be facing up.
To close, align the top and
d
bo om sides back
together and twist to seal.
When YOO is properly
e sealed you will see LED
lights race back and forth
for 5 seconds and then
stop
YOO is now activated and ready to
rock!
e
b
d
Lights will race back
and forth when
YOO is sealed!!!
STEP 2: A ach YOO® Clip
1. Snap YOO into the shoe/belt
loop clip or slide into the Trackit
Jacket™.
2. Clip it on securely to your shoe
or clothing and start walking,
moving, grooving or whatever gets
you going.
Important:
For be er
accuracy be sure YOO is
tightly secured to you and
not swinging or bouncing in
a pocket.
Trackit Jacket
STEP 3: Download YOO® App STEP 4: Sync YOO® to Phone
1.You'll need to download the YOO 1. With YOO logo-side down,
App next. double-tap the device.
2.Go to the APP store or Google 2. The LED' s will light up and move
Play and download it for Free. back and forth to indicate that you
are in SYNC MODE.
3.Follow the on-screen instructions
to set up your YOO Account and 3. Place YOO logo-side up on the
pair YOO to your phone. SYNC SCREEN on the YOO App.
4. Wait while the YOO uploads your
data to the APP. This takes about
Important: 30 seconds.
To view a
listing of compatible smart
5. If sync is successful 5 LEDs will
phones, go to:
flash. If not 2 LEDs will flash and
you will need to try again.
www.YooChallenge.com/compatibility
1
STEP 5: Activate YOO® Lights
1. Your YOO has LED lights built-in
to reveal your progress.
2. With your finger tip gently tap
your YOO ONCE with the logo side
facing your palm.
3. One or more lights will flash. The
chart below explains what each
light represents.
Important:
YOO uses LED lights to
3
communicate progress
towards your goal. Your
step goal is pre-set at
10,000/day but you can track
to a di erent goal on the app.
The key to the YOO Challenge is
earning Points for the NEW YOO
and there are lots of ways to do
that other than recording steps.
Start using the App and you will
find out how!
Important:
YOO uses light and
sound to communicate with your
phone. So it' s best to sync YOO
indoors and in a quite surrounding.
Also, for be er results,
turn up the brightness on
your phone. This makes
syncing easier for YOO.