Advertisement
Quick Links
Advertisement
Related Manuals for RealSYS SmartCopier
Summary of Contents for RealSYS SmartCopier
- Page 1 SmartCopier User Manual (Firmware Download) V2.21 RealSYS...
- Page 2 SMART COPIER NOTE • The specifications and contents of this product are subject to change for performance improvement. • Prohibit replication without permission, change, and the use in other applications of software and related documentations. • Free A/S is possible within the warranty period and if the failure is due to carelessness of user handling, the repair costs may be paid by user.
- Page 3 SMART COPIER OPERATING PRECAUTIONS ◈ Power Supply • Use provided insulated DC 5V, above 2A product for external adapter. • Use four reliable AA-type batteries for internal power source. (Since the power consumption by inverter model is different, it is recommended to use a lithium-ion battery.) ◈...
-
Page 4: Table Of Contents
SMART COPIER Contents 1. Specifications …… 5 2. Exterior …… 6 3. Monitor Functions …… 8 4. Input Devices …… 11 5. Output Port and Gender Structure …… 14 6. Operation and Use Description …… 17 7. PC Software and Driver Use Description ……... -
Page 5: Specifications
SMART COPIER 1. Specifications Item Description Note Product • SmartCopier Firmware/Parameter combined • SmartCopier Parameter only Display • Black and white graphic LCD 128 x 64 (green backlight available) • Power / Error / Read / Write State LED Input Device •... -
Page 6: Exterior
SMART COPIER 2. Exterior 2.1 Front LCD Display State LED Key Button 2.1 Side USB Terminal Power Switch External Power Input Terminal SD Card Slot Battery Cover <Left Side> <Right Side>... - Page 7 SMART COPIER 2.2 Top Parameter Firmware Communication Download Terminal Terminal ( RJ-45 ) 2.3 Back Battery Cover Battery Case ( AA-Size x4 )
-
Page 8: Monitor Functions
SMART COPIER 3. Monitor Functions 3.1 LCD Monitor Display Status bar Contents display Cursor display - Type of state Icon : Firmware Download Mode Display : Parameter Read/Write Mode Display : Inverter Model Display : Parameter Write Mode Display : Parameter Read Mode Display : BDM Write Mode Display : Real DSP-UT Write Mode Display : SD Card Insertion Status Display... - Page 9 SMART COPIER - Information message type This screen is displayed when SD Card is empty in the SD Card slot terminal of the product. If you press the Shift key, you can ignore the message. This screen is displayed in the process of recognizing the Card when you insert the SD card to slot terminal.
- Page 10 SMART COPIER 3.2 Display Functions ① Power Status LED ② Error Status LED ① ② ③ ④ ③ Read Status LED ④ Write Status LED - LED Display State Color Waveform State Description continue Green Steady power input state Power Status LED repeat Toggle...
-
Page 11: Input Devices
SMART COPIER 4. Input Devices 4.1 Button Key Move to down Move to up SHIFT MODE selection ENTER - Button Description UP key : Move the cursor to up. DOWN key : Move the cursor to down. SHIFT key : Move the screen to its previous state. ENTER key : Execute the function indicated by cursor / Select item MODE key : Move to the initial screen or call the special command... - Page 12 SMART COPIER 4.2 SD CARD Insertion / Removal - When the card is inserted When the care is inserted, put the card deep into the SD Card slot of the main body along with the sound “click”. The card must be fixed not come out of the body.
- Page 13 SMART COPIER 4.3 USB Connection / Disconnection - Connection USB 2.0 Mini-B Cable Connect the cable to the USB terminal of the main body. - Disconnection USB 2.0 Mini-B Cable Exit the application provided to user PC, and then remove the cable from the USB terminal of the main body.
-
Page 14: Output Port And Gender Structure
SMART COPIER 5. Output Port and Gender Structure RJ-45 Connector 10Pin Connector Terminal Terminal RJ-45 connected to the inverter and 10 pin connector connected to the gender use 1:1 direct cable with the target board. 5.1 Hardware connections using a gender board A. - Page 15 SMART COPIER 5.1.2 In case iS7 Main Downloader – using 7pin gender 1) Connect the cable 10P gender and smart copier. 2) When viewed from the front of the inverter, gender GND pins to attach to the bottom of the right column. Right colum PCB Back Silk Front...
- Page 16 ▶Cautions◀ ☆ Before the Smart Copier operation, please turn off the inverter power☆ When using the internal battery, smart copier reset if the cause, please check the batteries or use an external adapter. ☆ Please check the wiring☆ 1) If the connection of the inverter board and gender wrong, the smart copier may be the cause of the failure.
-
Page 17: Operation And Use Description
SMART COPIER 6. Operation and Use Description 6.1 Firmware Download • Enter the [Firmware Download] on the menu screen. • Select the file using the Up/Down keys on the file List. • To return to the previous screen, enter the Shift / Mode key. - Page 18 SMART COPIER *. When S100 / H100 IO Download failure, to do. - . For S100 / H100 IO, the downloading depending on CPU version may fail. In contrast, by changing the download mode(BDM+Serial), please try again. (By default, Smart Copier is set to BDM mode.) 1) Change to [BDM+Serial ] Mode •...
- Page 19 SMART COPIER 6.2 File Remove • Enter the [Firmware Download] or [Parameter Read] on the menu screen. • When the file list screen is displayed, Press and hold the Mode key for 3 seconds. ※ From the following steps, <Enter> and <Shift> key can only be used.
-
Page 20: Pc Software And Driver Use Description
PC. 7.1 Device Driver Installation ① When you connect SmartCopier product for the first time, [Add New Hardware Wizard] runs. If [Add New Hardware Wizard] does not run, execute [Add New Hardware Wizard] through the Control Panel Device Manager. - Page 21 SmartCopier Device", click [Next] button. ④ Hardware Installation is carried out. If compatibility information message occurs, clink the [Continue] button, and then continue with the installation. ⑤ When the driver is installed normally, SmartCopier device is added to the Device Manager in Control Panel.
- Page 22 SMART COPIER 7.2 Application Program Display Composition - Before the device is connected Communication Device Connection Button Port Inverter Model CPU Type File Attribute Use CSM use Information check Set CSM KEY Input File Path File Conversion Output File Path End Button - After the device is connected Device Disconnection Button...
- Page 23 SMART COPIER - Import Device File Device File List Selected file save button Device file Delete button Close button 7.3 Application Program Firmware File Conversion 7.3.1 Preparing Firmware File Prepare the firmware Output file generated by compiling in accordance with the compiler build options.
- Page 24 SMART COPIER ③ Unlock CSM : Unlock CSM use check ( Only use in TI DSP) ④ Set CSM Key : CSM set button 7.3.3 Input and Output file path set Firmware file(input) path set Conversion file(output)path set file in [Input] and specify the path to the converted file to save in [Output]. 7.3.4 File Conversion Click the Conversion button, you can convert the firmware file to the SCF file.
- Page 25 SMART COPIER 7.3.6 Save and Complete Device File Transmission window and complete message are displayed when transfer is complete. Type of displayed message are as follows. • Send File Success : File transfer success • Device Filename already exists : Duplicate name exists on the device file •...
- Page 26 SMART COPIER Copier version ④ After checking the version, please mouse right button in the top bar of the program. ⑴ Click mouse right button ⑵ select [Device Update] ⑤ [Device update] execution, [Execute] is active after 5 seconds. ⑴ Run [Execute] ⑵...
- Page 27 SMART COPIER Manual Corrections Version Date Description V2.02 14.July 2015 • Initial Manual V2.02a 22.Dec 2015 • How to connect using the gender board • Description BDM+Serail V2.1 12.April,2016 • Additional internal battery Description V2.21 22.June,2016...
Need help?
Do you have a question about the SmartCopier and is the answer not in the manual?
Questions and answers