Table of Contents
Advertisement
INITIAL SETTING : DATE AND TIME & OSD LANGUAGE
•
Initial setting is available in all operating modes.
•
To read the menus or messages in your desired language, set the OSD language.
•
To store the date and time during recording, set the date/time.
Turning the power on and setting the date and time
Set the date and time of your local area when turning on this camcorder for the fi rst
time. If you do not set date and time, the date and time screen appears every time you
turn on your camcorder.
1. Press the Power (
•
When you turn on your camcorder for the fi rst time, the Date/Time Set screen
appears.
2. Select the date and time information and change the setting values by using the
▲/▼/◄/► button.
3. Make sure the date/time is correctly set, then touch the Ok button.
•
After setting, the date and time are automatically recorded on a special data area of the storage media.
•
The year can be set up to 2039.
•
This camcorder adopts a built-in battery. When its charged capacity decreases, saved user settings may be reset so be sure to charge the
battery after use.
-
When the battery use time is signifi cantly decreased, the battery is near the end of its useful life and must be replaced by a
Samsung authorised service centre.
-
When keeping your camcorder with the battery fully charged, the user settings remain for 2 months or more.
-
When the battery is discharged, the date/time is initialised to "01/JAN/2009 00:00."
) button to turn on the camcorder.
Date/Time Set
Day
Month
Year
Hr
Min
01
/
JAN
/
2009
00
:
00
Move
OK
English_25
Advertisement
Table of Contents
