Speco D16HS Quick Setup Manual page 2

Quick Setup Guide
Speco Technologies DxHS Series DVRs
Recording Setup
• To setup a recording schedule, select SCHEDULE in the RECORD
menu. Navigate through the items using the mouse or the control button.
• Select CHANNEL > select NONE, CONTINUOUS, MOTION or
SENSOR > HIGHLIGHT AREA.
• To copy a schedule to a different channel, select the channel from the
COPY SCHEDULE menu.
G
D+ S1 N S3 A
Sensor
D
Inputs
RS-485D+
Alarm
Output
RS-485D-
G
D- S2 N S4 B
D
Alarm I/O Setup
• In the SETUP menu, select the SYSTEM tab and click on System
Event Notification.
• Set the sensor, motion, and video loss for triggering alarm relay output.
• HDD Error and Video Loss can also trigger beeping.
IP Camera Setup
Select the IP Camera tab.
• CHANNEL: Enable/
Disable On-Screen
Display
• PROTOCOL: Select the
Brand of the Camera.
• SCAN: Will
Automatically search
the IP Camera
• IP: Setup IP Camera
• PORT: Setup a Camera
Port (Default: 554)
• WEB PORT: Setup Web Port(Default: 80)
• ID: Setup IP Camera Connect ID
• PASSWORD: Set up IP Camera Connect Password
• SETUP: IP Camera Video Setup(Resolution, Frame rate and Bitrate)
Network Setup
Select the NETWORK tab.
• For DHCP, set the Network Type for DHCP and exit to the menu.
The IP address, Subnet Mask, Gateway and DNS settings are retrieved
from network servers. DHCP is dynamic and the settings will change
from time to time.
• For Static, set the Network Type to Static.
Enter the IP address, Subnet Mask, Gateway and DNS.
Obtain this information from the network service provider.
• The Client Access must be ON for the DVR to be accessed remotely.
• Enable DDNS for free DDNS name server.
Connect the DVR via Web-Browser Viewer
Setup Requirements
• Make sure PC is connected to the Internet.
• Make sure DVR is already setup following the Network Setup steps.
Internet Settings
• Start Internet Explorer; go to 'Tools' → 'Internet Options'
→ 'Security' tab.
• Select 'Trusted sites' and click 'Sites' to specify its security setting.
• in this zone". Enter the IP address of the DVR in this
• In the Security Level area, click 'Custom Level'. Under
'ActiveX controls and plug-ins', set all items to 'Enable' or 'Prompt'.
• Click 'OK' to accept the settings and close the 'Security Settings'
screen.
Obtain Network Information of the DVR
Connect the DVR via Web-Browser Viewer
continued
• Obtain IP address from System Information from the Sub Menu.
• In the SETUP menu, select the SYSTEM tab and enable CLIENT
ACCESS.
• In the SETUP menu, select the NETWORK tab and click on
NETWORK PORT.
Obtain the network and web port number.
• Start Internet Explorer and enter the IP address and port of the DVR.
- For example: http:// [ip address] : [port] → http://172.16.2.41:80
• The ActiveX controls and plug-ins dialog will be prompted for
installation.
• Install the plug-ins.
• Click on 'Connect' and enter the username and password of the DVR.
- The default usernames and passwords are admin / 1111 and user1
/ 1111.
Mobile View Software
The DVR provides mobile surveillance software for both the iPhone and
the Android™.
iPhone
®
D16HS D16HS
D16HS
D16HS
D16HS D16HS
D16HS
• Search for 'Speco Player' in the Apple App Store and install the app.
• Select the ADD menu and enter site information. Click ADD to save
the site information.
• Select the saved site from "Devices".
• Select a channel(s) to view.
• Select Playback/Live then click CONNECT.
Android
™
• Search for 'Speco Player' in the Android Play Store and install the app.
D16HS
D16HS
Mobile View Software
continued
• Select the ADD menu and enter site information. Click ADD to save
the site information.
• Select the saved site from "Devices" for network connection.
• Select a channel and select Live view or Playback.
• Click START button
Connect the DVR via SpecoTech
Multi-Client Viewer Software
SpecoTech Multi-Client Viewer Software is a multiple site monitoring
client software that allows streaming of video and audio, and transmission
of alarm signals from the DVR's over the network.
The SpecoTech Multi-Client can display up to 16 DVR's and supports
dual monitors.
PTZ camera control is also supported by this software.
By attaching a microphone and speaker system to devices on site, the
user may make bi-directional audio communication over the network.
Refer to the complete manual for more information.
The SpecoTech Multi-Client Viewer Software and
manual are included on the CD.
200 New Highway
Amityville, NY 11701
1-800-645-5516
www.specotech.com
Speco Technologies is constantly developing and improving products.
notice and without incurring any obligation. Rev. 5/21/13