Advertisement
Quick Links
ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL
ADDRESSABLE XTRATONE SOUNDER BEACON
Description
The Xtratone addressable sounder beacon
is a small, high output device, suitable for
indoor wall mounted applications.
It is available in red or white and has a
selection of 16 alarm tones, selectable at
the control panel.
Termination of field wiring is made to the
backbox for a clean first fix.
Connections - First Fix
The loop wiring connects to terminals in
the back box.
Earth
Not Used
Document No: GLT-207-7-2
Issue No: 007
INSTALLATION MANUAL
Final Fix
•
•
•
•
•
Loop In/Out
Positive
Loop In/Out
Negative
Page 1
Set the device address (see address
setting)
Fix the BROWN sounder flying lead to
the POSITIVE terminal
Fix the BLUE sounder flying leads to
the RIGHT NEGATIVE terminal
Screw the sounder body to the backbox
Fit the sounder front cover
Front Cover
8 Way DIP Switch
Sounder Body
Flying Leads
Author: NRP Jones
Date: 11/01/2018
Advertisement
Related Manuals for Zeta Alarm Limited MKII-AXTB/R
Summary of Contents for Zeta Alarm Limited MKII-AXTB/R
- Page 1 ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL ADDRESSABLE XTRATONE SOUNDER BEACON INSTALLATION MANUAL Final Fix Description • The Xtratone addressable sounder beacon Set the device address (see address setting) is a small, high output device, suitable for • indoor wall mounted applications. Fix the BROWN sounder flying lead to the POSITIVE terminal It is available in red or white and has a...
- Page 2 ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL Address Setting This sounder is addressed via an 8 way dip switch. All 8 switches are used for the address setting. It is a binary arrangement, with ON being the zero position. Switch Value when ON Value when Off The Switch settings can be calculated using these numbers.
- Page 3 ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL Alarm Tone Selection The Xtratone sounder beacon supports alarm tone selection. IE, the installer can decide which alarm tone ALL the sounders will use. The alarm tone can be set for the whole system via the control panel.
- Page 4 1.0 Hz 43mA 1.5 Hz 43mA 5.4mA * Approved Flasher setting Beacon Coverage The Xtratone addressable sounder with beacon (MKII-AXTB/R & MKII-AXTB/W) has a coverage pattern of W-3.1-9.1 and a flash rate of 0.5 Hz. 2.4m 3.1m 7.44m 9.1m 7.44m 9.1m...
-
Page 5: Technical Data
ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL Technical Data Model MKII-AXT/R MKII-AXT/W MKII-AXTB/R MKII-AXTB/W Part Number 42-610A 42-611A 42-617 42-618 Colour White White Flash Colour White flash Flash Rate 0.33 - 1.5 Hz (depends on setting) Flasher Coverage W-3.1-9.1 for setting 1 Sounder Output 80.4dB @ 1m... - Page 6 ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL Document No: GLT-207-7-2 Author: NRP Jones Page 6 Issue No: 007 Date: 11/01/2018...
- Page 7 ADDRESSABLE XTRATONE SOUNDER BEACON - INSTALLATION MANUAL Document No: GLT-207-7-2 Author: NRP Jones Page 7 Issue No: 007 Date: 11/01/2018...
-
Page 8: Other Information
EN 54-3:2001 + A1:2002 + A2:2006, EN 54-23: 2010 Alarm Devices – Sounder & VAD Type A: For Indoor Use MKII-AXTB/R (W) Other Technical Data: See Doc: “Addressable Xtratone Product file” held by the manufacturer Zeta Alarms Ltd, 72-78 Morfa Road, Swansea SA1 2EN...