Samsung DC165 Owner's Instruction Manual page 41

Dvd
Table of Contents

Advertisement

ENGLISH
DVD Camcorder: Before Recording
When using a New Disc: Formatting a New Disc
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting will automatically begin.
For a DVD-RW disc: You are prompted with the <Disc is not
formatted. Format?> message.
Video (Video Mode) : If the disc has been fi nalized, you will be able
Differences
to play the disc on most DVD Players/Recorders.
between
Video and VR
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
mode
playback is only possible on a DVD Recorder that supports VR mode.
 Refer to page 12 for Finalized disc compatibility.
Move the [Joystick] left or right to select <Video> or <VR>, then press
[Joystick(OK)].
Please refer to page 11 for disc type descriptions and usage.
Upon completion, the <Complete!> message will appear.
If you select <Cancel>, the <Not formatted!>
warning message will appear. Formatting a new
disc is required to record on it. To format later,
use the <Disc Manager> menu. page 81
For a DVD+RW disc: You are prompted with the
<Disc format? All fi les will be deleted!> message.
Move the [Joystick] left or right to select <Yes>,
then press [Joystick(OK)].
Upon completion the <Complete!> message will
appear.
If you select <No>, the <Not formatted!>
warning message will appear. Formatting a new
disc is required to record on it. To format later,
use the <Disc Manager> menu. page 81
Removing a Disc
1. Push the [OPEN] switch in the direction of the arrow.
 The disc cover will partially open.
2. Gently open the cover the rest of the way by hand.
3. Remove the disc.
 While pushing down the center portion of the disc spindle, pick
up the disc by the edges to remove.
4. Gently push the section marked [PUSH CLOSE] on the disc cover
to close it.
Note
The Finalize/Format functions are not available at battery level
and
.
Videocámara con DVD: Antes de grabar
Al utilizar un nuevo disco: Formateo de discos
Será necesario formatear un disco nuevo al introducirlo.
Se iniciará el reconocimiento del disco.
Para un disco DVD-R/+R DL: Se iniciará automáticamente el formateo.
Para un disco DVD-RW: Aparecerá el mensaje <Disc is not formatted.
Format?>
Diferencias entre el
modo Video y VR
 Consulte la página 12 para conocer la compatibilidad de un disco fi nalizado.
Mueva el [Joystick] a la izquierda o a la derecha para seleccionar <Video>
o <VR> y presione el botón [Joystick(OK)].
SP
Disc is not formatted.
Format?
Video
VR
Cancel
<When a DVD-RW disc is formatted.>
Formatear un nuevo disco es necesario para grabar en él. Para
formatearlo posteriormente, utilice el menú <Disc Manager>. página 81
Extracción de un disco
1.
Presione el interruptor [OPEN] en la dirección de la fl echa.
 La cubierta del disco se abrirá parcialmente.
2.
Abra suavemente la cubierta con la mano el espacio restante.
3.
Retire el disco.
 Mientras presiona la parte central de la pletina, sujete el disco por los
bordes para retirarlo.
4.
Empuje suavemente la sección marcada como [PUSH CLOSE] en la
cubierta del disco para cerrarla.
Nota
La función Format/Finalize (Formato/Finalizar) no está disponible en el nivel de
batería
o
Video (Modo Video): Si el disco se ha fi nalizado, podrá
reproducir el disco en la mayoría de los Reproductores/
Grabadoras de DVD.
VR (Modo VR): Puede editar el disco en una Videocámara
con DVD, pero la reproducción sólo es posible en un
Grabador de DVD que admita el modo VR.
Consulte la página 11 para las aplicaciones por modo.
Al fi nalizar aparecerá el mensaje <Complete!>.
Si selecciona <Cancel>, aparecerá el mensaje <Not
formatted!>. Formatear un nuevo disco es necesario
para grabar en él. Para formatearlo posteriormente,
utilice el menú <Disc Manager>. página 81
Para un disco DVD+RW: Aparecerá el mensaje <Disc
format? All fi les will be deleted!>.
Mueva el [Joystick] a la izquierda o a la derecha para
seleccionar <Yes> y presione [Joystick(OK)].
Al fi nalizar aparecerá el mensaje <Complete!>.
Si selecciona <No>, aparecerá el mensaje <Not
formatted!>.
.
ESPAÑOL
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc164Sc-dc165Sc-dc163Sc-dc164

Table of Contents