Advertisement
Quick Links
MOTION SENSOR
The Motion Sensor detects movement across a
room or hallway, and should be used to secure
larger, high-traffic areas.
The motion sensor has a range of 90 degrees,
and detects motion up to 30' away.
Determine where you want to mount your motion
sensor. You can choose to wall mount the sensor
or rest it on a shelf. Do not place the sensor near
a ventilation source or pointed toward windows.
*
*
Note: In order to save battery power, the motion sensor rests for approximately 5 minutes
after sending a signal before sending a signal again. While you are testing the sensor,
please keep in mind this 5-minute resting period. For the sensor to reset it must sit idle
for 5 minutes with no motion detection.
Need help? Call 1-877-826-5443
Advertisement
Summary of Contents for Link Interactive Motion Sensor
- Page 1 Do not place the sensor near a ventilation source or pointed toward windows. Note: In order to save battery power, the motion sensor rests for approximately 5 minutes after sending a signal before sending a signal again. While you are testing the sensor, please keep in mind this 5-minute resting period.
- Page 2 Note: If you have pets, visit the Resource Center at www.linkinteractive.com/installation-guide/ for tips to set up your Motion Sensor for use with pets. Flush Wall Step 2 Mount - Straight...
- Page 3 MOTION SENSOR TESTING The motion sensor has a detection range of 80 degrees, and detects motion up to 25 feet away. 25 feet 80˚ ARC Note: Make sure system is disarmed. 20 feet 1. To activate test mode, press the button on the bottom of the sensor and separate the front portion.
Need help?
Do you have a question about the Motion Sensor and is the answer not in the manual?
Questions and answers