Related Manuals for JD Williams Ltd. Avanti 6 Seat Bar Set
Summary of Contents for JD Williams Ltd. Avanti 6 Seat Bar Set
- Page 1 Avanti 6 Seat Bar Set Assembly Instructions Product size: Table: L150xD70xH106cm Chair: W40xD35xH72cm IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY...
-
Page 2: Before You Start
Avanti 6 Seat Bar Set Assembly Instructions Before you start Warnings IMPORTANT, RETAIN FOR FUTURE REFERENCE Do not use scourer, abrasives, washing powders, READ CAREFULLY chemical cleaners or any other substances containing abrasives since these substances can damage the product, including the glass panel. - Page 3 Avanti 6 Seat Bar Set Assembly Instructions Components，fixtures & fittings（not actual size） Parts List Part Part Diagram Diagram 52 PCS 1 PC M6x15mm 24 PCS 1 PC M6x25mm 1 PC 20 PCS M6x30mm 1 PC 96 PCS 1 PC 4 PCS...
- Page 4 Avanti 6 Seat Bar Set Assembly Instructions Note: All Bolt Head Caps and Nut Caps should not be attached before finally tightening all Bolts with the Allen Key. Only tighten all bolts when you are satisfied with the alignment of all components.
- Page 5 Avanti 6 Seat Bar Set Assembly Instructions Step Three Fasten the table supporting part (Part D) with the table leg part by bolts (Part I) and washers (Part L). Step Four Fasten the adjusting knob(Part M) with the bottom of the table leg.
- Page 6 Avanti 6 Seat Bar Set Assembly Instructions How to ... assemble the chairs Step One Connect the chair leg part (Part G) with the chair seat part (Part F). Fasten them together by bolts (Part J and K) and washers (Part L).