Aumeo Audio V.1 Quick Start Manual

AUMEO QUICK START GUIDE - SIDE B
Audio Out Port
1
Download
AumeoHub
STEP 1 STEP 2
DOWNLOAD AUMEOHUB AND CHARGE AUMEO CONNECT YOUR HEADPHONES
Download Aumeo's companion app AumeoHub from the App Store or Google Plug your headphones into the audio out port on Aumeo. You can use any set
Play. Open the app and register your account.
of wired headphones with a 3.5mm jack.
In the meantime, charge Aumeo by connecting it to a power source with a
micro-USB charging cable.
Please charge the device for at least 15 minutes before powering on.
FOLD NOTES:
Quick start guide to have accordian fold construction.
CUT
Please see sample sent.
Power Button
2 3 4 5
Audio
Source
Switch
STEP 3 STEP 4
PAIR AUMEO WITH YOUR PHONE WIRELESSLY CREATE YOUR AUDIO PROFILE
Make sure audio source switch is in wireless position and Aumeo is powered OFF. Open the app AumeoHub on your phone. Follow the instructions to measure
®
Press the power button and hold until Aumeo enters Bluetooth pairing mode and 3 your ears and create your audio pro le. Once done, your audio pro le will be
lights are blinking red. Pair Aumeo with your phone wirelessly. saved to Aumeo.
*To cancel Bluetooth ® pairing mode, press and hold power button again until
the lights stop blinking red.

USING AUMEO WITH OTHER AUDIO SOURCES

Once your audio pro le is created and saved to Aumeo, you can use Aumeo
with other audio sources, not just your phone.
Toggle
Aumeo E ect ON
Aumeo
E ect
Aumeo E ect OFF

CONNECT WIRELESSLY

Make sure audio source switch is in wireless position and Aumeo is powered
OFF. Press the power button and hold until it enters Bluetooth
and 3 lights ash red. Pair Aumeo with your audio source.
STEP 5
ENJOY MUSIC TAILORED TO YOUR EARS
Open your favorite music player app and enjoy music tailored to your ears. If
your headphones have a mic, you can also have phone conversations using
Aumeo.
CONNECT USING LINE-IN CONNECTION
Make sure audio source switch is NOT in wireless position and Aumeo is
To compare the di erence before and after the audio-tailoring, you can toggle
powered ON. Plug one end of the 3.5mm audio cable into Aumeo's audio in
the Aumeo e ect on and o by pressing the at side of the volume dial.
port and the other end into your audio source's audio out port.
If 6 white lights show up when pressed, Aumeo's tailoring e ect is ON. If 3 ash
white and red when pressed, Aumeo's tailoring e ect is OFF.
Power Button
® pairing mode
Micro-USB Charging Port
BATTERY

VOLUME AND POWER

CHARGING

USING THE VOLUME DIAL

Adjust the volume by turning the volume dial. To protect your ears, start at the
You can charge your Aumeo by connecting it to a power source with a
micro-USB charging cable. The lights will glow red and white when charging. lowest volume rst and turn the volume up until it reaches a comfortable level.

POWERING ON AND OFF

BATTERY LEVEL INDICATOR

To power Aumeo on, press the power button and release when lights come on in
To see how much power your Aumeo has, press the power button quickly. All 6
clockwise direction. To power Aumeo o , press the power button and release when
lights will glow white when Aumeo is fully charged.
lights go out in counterclockwise direction.
Volume Dial
Power Button