Advertisement
Connection
Only use the same transceiver model between switches for fast and reliable connectivity.
Switch
Specifications
General Specifications
Normal
TXM431-LR
Wave Length
1310nm
Standards and Protocols
IEEE 802.3ae, CSMA/CD, TCP/IP
Cable
Single-mode Fiber
Fiber Type
9/125 um Single-mode
Max. Cable Length
10km
Data Rate
10Gbps
Port Type
LC/UPC
Power Support
3.3V
Safety & Emission
FCC, CE
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
BSMI Notice
安全諮詢及注意事項
請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
注意防潮，請勿將水或其他液體潑灑到本產品上。
插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。
限用物質含有情況標示聲明書
限用物質及其化學符號
鉛
鎘
汞
產品元件名稱
產品元件名稱
Pb
Cd
Hg
PCB
PCB
○
○
○
外殼
外殼
○
○
○
備考： "○"系指該項限用物質之百分比含量未超出百分比含量基準值。
TXM431-LR
TXM431-SR
850nm
Multi-mode Fiber
50/125 um or 62.5/125
um Multi-mode
300m or 33m
六價鉻
多溴聯苯
多 溴二苯醚
CrVI
PBB
PBDE
○
○
○
○
○
○
Switch
Fiber
Environmental and Physical Specifications
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
TP-Link Compatible Products
TP-Link Switches with 10G SFP+ Slots
TX-432
Note:
The SFP modules may be incompatible with other vendors' devices. We
recommend that you use only TP-Link SFP modules on your TP-Link devices.
For technical support and other information, please visit
http://www.tp-link.com/support, or simply scan the QR code.
CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів
та вимогам, що передбачені чинними законодавчими актами України.
Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of
directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce
この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場
合には使用者が適切な対策を講ずるよう要求されることがあります。
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure
your eyesight.
TXM431-LR
0˚C to 70˚C (32˚F to 158˚F)
-40˚C to 80˚C (-40˚F to 176˚F)
10% to 90% RH, Non-condensing
5% to 90% RH, Non-condensing
VCCI-A
Advertisement
