Advertisement
Quick Links
Download this manual
See also:
User Manual
AVer CP Series
Quick Start Guide
Package Contents
AVer CP series
Stylus pen x 2
Remote control
Optional Accessories
1. Wall mount
2. Floor stand
3. OPS
Audio cable
VGA cable
Power cable x 3
(US, UK, EU)
USB cable(5M)
4. Wireless presentation receiver
Start Up
1. Connect the power cord to power port (100V - 240V, 50Hz/60Hz), then, plug into wall outlet.
2. Press rocker switch to enter standby status and the power indicator will turn to red.
Rocker switch
(next to the power port)
3. Next, press the power switch (located on the front panel) or the power button on the remote control to turn
on the interactive panel. If you have an OPS computer installed, it will turn on, too. The power indicator on
the front panel turns green when the system is fully started.
4. The main display screen will be shown as below.
power port
Power cord
Power switch
(Located at front panel)
Advertisement
Related Manuals for AVer CP Series
Summary of Contents for AVer CP Series
-
Page 1: Package Contents
AVer CP Series Start Up Quick Start Guide 1. Connect the power cord to power port (100V - 240V, 50Hz/60Hz), then, plug into wall outlet. Package Contents Audio cable power port Power cord 2. Press rocker switch to enter standby status and the power indicator will turn to red. -
Page 2: Wall Mount Installation
2. Secure the OPS with screws and make sure the OPS is installed properly. The AVer CP supports a variety of input sources. Follow the steps below to select the different input sources. Step 1: Press SOURCE on the remote control or press Source on the control panel of the interactive panel.
Need help?
Do you have a question about the CP Series and is the answer not in the manual?
Questions and answers