Summary of Contents for Arm's Reach Ideal Ezee Co-Sleeper
Page 1
Ideal Co-Sleeper Ezee 3 in 1 Bedside Sleeper Free-Standing Bassinet Play Yard ® by Arm's Reach...
Page 2
Use only the pad provided by manufacturer. NEVER add a pillow, comforter or another mattress for padding. If a sheet is used with the pad, use only the one provided by Arm's Reach. To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
Page 3
Check before assembly and periodically during use. Contact ® Arm's Reach Concepts, Inc. for replacement parts. Never substitute parts. NEVER leave child in product with side lowered. Be sure side is in raised and locked position whenever child is in product.
Page 4
NEVER leave infant unattended in this product. To prevent serious or fatal injury from falls always, keep child within arm's reach. Never leave your child unattended.
Parts List A. Fitted Sheet 1 pc B Mattress 1 pc C Mattress Support Bars 4 pcs (Provides flatness) Frame E. Mattress Support-straps (Prevents Sagging) D. Plastic Receiver F. Plastic Connector J. 2 Inch Leg Increments 3 pcs G. Lowering Rail H.
Page 6
® ® How to set up the Arm's Reach Co-Sleeper bedside bassinet WARNING: Failure to follow these warnings and instructions could result in serious injury or death. Step 1 Remove product from the carry bag (L). ® Undo the Velcro straps of mattress (B).
Page 7
How to set up as freestanding bassinet FALLING HAZARD: Remove infant from this product before starting any conversions. Step 1 Release 4 mattress support-straps (E) that go over the lowering rail. Insert foot into the red foot strap under the center of front bottom, find the locking button under the plastic connectors (F) on the left and right sides, press them upward to unlock and slide the lowering rail (G) upward until you hear a "click"...
Page 8
How to convert to the co-sleeping position from the freestanding bassinet FALLING HAZARD: Remove infant from this product before starting any conversions. Step 1 Find the locking button under the plastic connectors on the left and right sides, press them upward to unlock and slide down the top bar until you hear a "click"...
Page 9
® ® How to attach the Arm's Reach Co-Sleeper bedside bassinet to adult bed Buckle Loop ® ® Never use the Arm's Reach Co-Sleeper bedside bassinet in co-sleeping position without the anchor plate and securely attached to the adult bed.
Page 10
How to convert to the play yard from the freestanding bassinet FALLING HAZARD: Remove infant from this product before starting any conversions. Step 1 Remove the mattress with sheet and mattress support bar from the freestanding bassinet. Step 2 Remove the sleeping nest bottom by releasing the small buckle at the end of zipper pull, the zipper around and the buckles on the back of the sleeping nest.
Page 11
How to fold the play yard STRANGULATION HAZARD When anchor plate and strap assembly are not in use, store in a safe place not accessible to children. Step 1 Remove mattress (B) and set aside. Hold the webbing handle strap on the center of bottom and pull up. Step 2 Unlock short top rails by raising center lock slightly, push on button of center locks and lower top rails.
Page 12
Keep pressing it at the top and bottom lock position will prevent the male receiver from locking into the place. Visit our website www.armsreach.com for video tutorials under the Assembly Instructions link. ® ® You can also search You Tube for Arm's Reach Co-Sleeper for video tutorials.
Need help?
Do you have a question about the Ideal Ezee Co-Sleeper and is the answer not in the manual?
Questions and answers