Related Manuals for 1byone O00QH-050
Summary of Contents for 1byone O00QH-050
- Page 1 All product with the Easy Chime Logo work together Instruction Manual 1byone Products Inc. 2313 E, Philadelphia Street, Unit M, Ontario, CA 91761 SKU: O00QH-0501 / O00QH-0013 www.1byone.com O00QH-0012 / OJPQH-0013...
- Page 2 Thank you for purchasing 1byone Wireless Doorbell. Please read this Instruction Manual before use to ensure safe operation. 1. Package Contents: 1 x Doorbell Receiver 1 x Push Button 1 x 3V Battery (Type: CR2032) for Push Button 1 x Double-sided Adhesive...
- Page 3 a) Insert a screwdriver into the small access port Parameters: at the bottom of the push button and Voltage of receiver DC 3V (2 x AA batteries) remove the push button’s back cover. Voltage of push button DC 3V (CR2032 battery) b) Insert the 3V battery (type CR2032) into the Frequency 433.92MHz+100KHz...
- Page 4 Up to 5 push buttons can be paired with one an LED at the same time. These are referred to as receiver. You can also extend the wireless Sound, Flash, and Sound+ Flash mode. doorbell system with any number of receivers. To select the notification mode, switch the This is only possible if the push button and sound and flash switch to the one of the...
- Page 5 To reset the push buttons, you need to cut off usually close to your outside door. the power supply for the receiver and push Stick the push button to the wall using the button. included double-sided adhesive. Remove the batteries from the push button and b.
- Page 6 Notes: c. Install the name plate: ・The push button and receiver can connect with Remove the transparent cover from the push a range up to 100m/300ft without any button. obstacles. Then write your name or room number on a ・The push button’s transmitting frequency is small paper (size: 2.3cm/0.9in x 2.0cm/0.8in).
- Page 7 ・Check whether the batteries (2 x AA) are ・Remove the batteries from the receiver and inserted into the receiver. push button if the doorbell system is not to ・Pair the receiver and push button again. be used for an extended period of time. c.
- Page 8 Disposal of batteries Used batteries may not be disposed of in household waste. All consumers are statutorily required to dispose of batteries at a collection point provided by their local municipality or retail store. The purpose of this obligation is to ensure batteries are disposed of in a non-polluting manner.