Bump Test Schedule; Calibration Schedule; Alarm Thresholds; Firmware Version - Honeywell BW Clip4 Operator's Manual

Bump Test Schedule

Calibration Schedule

Alarm Thresholds

Firmware Version

Remaining Lifetime

2.7 Bump Test

Shop for Gas products online at:
To see the number of remaining days until the next
bump test, get into the
to
To see the number of remaining days until the next
calibration, get into the
ahead to
To see low alarm thresholds, get into the
menu. Skip ahead until the alarm symbol
appears with
STEL, low and high alarm thresholds.
To see the firmware version, get into the
menu. Skip ahead to
To see the remaining lifetime, get into the
menu. Skip ahead until the number of months or days
of remaining lifetime appears.
Bump testing is the process of briefly exposing the gas sensors to a
known concentration of calibration gas that is greater than the low alarm
threshold. This is the only way to verify the proper operation of the gas
detector.
CanarySense
www.
.
.
. Press the button again to see
.com
13
Daily Operation
menu. Skip ahead
menu item. Skip
.
1.888.610.7664