Advertisement
To Do Wireless LAN (Wi-Fi®) Connections via Manual Settings
This section explains how to connect to Wi-Fi® using a Mac OS PC or iPad/iPhone/iPod Touch as examples.
1
Tapping [Manual connection] on the Setup Wizard shows the screen below.
If you are doing settings from the home screen, tapping
[Information] - [Wi-Fi Information] shows the SSID(Primary)
and Password.
[For Mac OS]
2
Turn the PC on and enable the wireless function.
* Refer to the user manual, etc., for your PC for how to connect.
3
システム環境設定
ネッ トワーク
On the Apple menu, click the [
(System Configuration)] - [
(Network)]
icon and select [Wi-Fi] from the service list.
4
ネッ トワーク名
From the [
(Network Name)] pulldown menu, select the SSID(Primary) of this product,
1
"wx03-xxxxxx", that was displayed in
.
5
Enter the password for this product in [
パスワー ド
(Password)], and
接続
then click [
(Connect)].
* This screen is an example using OS X v 10.11.
6
If [
接続済み
(Connected)] is displayed in [
状況
(Status)], tap [Next] on
the product to return to
.
If a connection could not be made, check the input characters (capital/lowercase) and that
the wireless function for your PC is enabled, and then retry from step 1.
Connecting via Bluetooth® Function
Use this product as an access point to connect Bluetooth® devices, such as a smartphone or tablet, to
the internet. It is efficient for saving the battery.
Up to 3 devices can be connected to the product via Bluetooth® function. (For pairing, up to 3 devices
can be registered.)
However, depending on the connection status of your Bluetooth® equipped device, the number of
connected devices may not reach the limit.
* The wireless LAN (Wi-Fi®) function (on the previous page) and the Bluetooth® function cannot be used simultaneously.
Tablet
WiMAX 2+
The product
Bluetooth®
Smartphone
• If Bluetooth® is disconnected after pairing, tap the Bluetooth device name for this product on the
Bluetooth screen of the Bluetooth® equipped device you are using to reconnect.
• When the number of paired devices reaches the limit, "You cannot configure because the number of
connected devices has got to the maximum." is displayed on the product's display. In that case, delete
pairing information displayed in "Bluetooth Pairing Info" on "Bluetooth Settings" in the screen of the
Quick Setting Web.
Checking the Devices
• Your Bluetooth® equipped device supports Bluetooth 2.1 or later.
• Your device supports the profile (PANU) which can connect to the internet.
For models that support PANU, see the manufacturer's website for each Bluetooth® equipped device.
Preparing for the Connection
Take Note of the Product's Bluetooth Device Name
1
Tap [Information] - [Bluetooth Information] when the home screen is displayed on the product's
display (touch panel).
2
"Device Name (Tethering)" is displayed.
The Bluetooth device name of this product is displayed in "Device Name (Tethering)".
Bluetooth Device Name
Memo
* Write it down in the location described in the
enclosed
つなぎかたガイ ド
"Setup Guide" (Japanese).
Switching the LAN Connection Settings to Bluetooth®
1
Tap [Quick Menu] → [LAN Side Wireless] when the home screen is displayed on the product's display
(touch panel).
2
Tap [Bluetooth] to select it.
3
Wait awhile, and then check that
is displayed on the status bar.
[For iPad/iPhone/iPod Touch]
2
設定
Start your iPad/iPhone/iPod Touch and tap [
(Settings)].
* Refer to the user manual, etc., for your device for how to connect.
3
Tap [Wi-Fi].
4
1
Turn on [Wi-Fi], and tap the SSID(Primary) of this product, "wx03-xxxxxx", that was displayed in
.
5
Enter the password for this product in
[
パスワー ド
(Password)], and then tap
接続
either [
(Connect)] or [Join].
* This screen is an example using iOS 9.3.
6
If the following icon is displayed in the status bar of your iPad/iPhone/iPod Touch, tap [Next] on the
product to return to
.
If a connection could not be made, check the input characters (capital/lowercase) and that the wireless function for your device is enabled,
and then retry from step 1.
Configuring the Connection Information
For Smartphones/Tablets (Android Devices)
1
Tap [Settings] - [Bluetooth Settings] when the home screen is displayed on the product's display (touch
panel).
2
Tap [Bluetooth Pairing].
"Bluetooth Pairing is in progress..." is displayed on the display.
3
設定
Tap [
(Settings)] - [Bluetooth] on your Bluetooth® equipped device and set to "ON".
* For how to do settings, refer to the user manual, etc., for the device you are using.
4
The Bluetooth device name for this product is displayed on the
Bluetooth® equipped device you are using. Tap it.
5
When "Does your device display the following number? ****** " is
displayed on the product's display (touch panel), check the number,
and then tap [YES].
* " ****** " is the verification number that is used between these devices. It
changes each time you do pairing.
6
ペア設定する
Tap [
(Pairing)] on your Bluetooth® equipped device.
The displayed items may vary depending on the Bluetooth® equipped device.
7
Once the message "Bluetooth Pairing succeeded." is displayed on the product's display (touch panel),
tap [Exit].
1
* If "Bluetooth Pairing failed. " is displayed, retry from step
.
8
On your Bluetooth® equipped device, tap the Bluetooth® device name
of this product to connect to the internet.
If the device cannot be connected to the internet, tap the icon on the right side of
the device name to check that "Internet Access(*)" is marked.
(*) The displayed items may vary depending on the Bluetooth® equipped device.
9
Check that a value of "1" or more is displayed to the bottom right of
in the product display.
* This number indicates the number of connected devices.
Waiting and Idling
- Waiting: A function to minimize power consumption in order to increase the operating time.
- Idling: A function for prompt start from wireless idling state.
Energy-Saving Mode Setting
This function saves energy by limiting the communication speed of WiMAX 2+ and Wi-Fi®, and extends
the continuous operating time.
Select from High Performance Mode, Normal Mode, or Eco Mode. The default value is "Normal Mode".
Do settings on the display menu's [Quick Menu] - [ECO Mode] or on Quick Settings Web's [Network
Settings] - [Basic Settings].
High Performance Mode: Does not limit the communication speed, but the continuous operation time
is shorter than other mode.
Eco Mode: Limits the communication speed and the continuous operation time becomes longer.
Normal Mode: Does not limit the communication speed when the remaining battery level is
enough. But when the remaining battery level is low, it limits the communication speed and the
communication operation time becomes longer. This function switches when the non-communication
state of WiMAX 2+ continues.
* You must restart the product when switching between High Performance Mode, Normal Mode, and Eco Mode.
For iPad / iPod touch
* This function is unavailable, as iPhone does not support PANU. (As of October, 2016)
1
Tap [Settings] - [Bluetooth Settings] when the home screen is displayed on the product's display (touch
panel).
2
Tap [Bluetooth Pairing].
"Bluetooth Pairing is in progress..." is displayed on the display.
3
設定
Tap [
(Settings)] - [Bluetooth] on your Bluetooth® equipped device and set to "ON".
* For how to do settings, refer to the user manual, etc., for the device you are using.
4
The Bluetooth device name for this product is displayed on the
Bluetooth® equipped device you are using. Tap it.
wx03
5
When "Does your device display the following number? ****** " is
displayed on the product's display (touch panel), check the number,
and then tap [YES].
* " ****** " is the verification number that is used between these devices. It
changes each time you do pairing.
6
Tap [
ペアリング
(Pair)] on your Bluetooth® equipped device.
The displayed items may vary depending on the Bluetooth® equipped device.
7
Once the message "Bluetooth Pairing succeeded." is displayed on the
product's display (touch panel), tap [Exit].
1
* If "Bluetooth Pairing failed. " is displayed, retry from step
.
8
接続済み
Check that "wx03-xxxxxx
(Connected)" is displayed on the
Bluetooth® equipped device you are using.
* The Bluetooth® equipped device name for this product is displayed as "wx03-
xxxxxx".
wx03
9
Check that a value of "1" or more is displayed to the bottom right of
in the product display.
* This number indicates the number of connected devices.
Displayed Information
<Home screen and status icon>
<Settings menu screen>
①
②
③④⑤ ⑥
⑦ ⑧
Status icon
⑨
Message
Name
Indicator
State
① Reception level
Illuminating
Indicates the signal strength of WiMAX 2+ in 5 levels
Illuminating
Indicates that the product is out of WiMAX 2+ service area
② Connection status
Illuminating
Indicates that the product is connected to the internet with WiMAX 2+
Blinking
Indicates that the product is connecting to the internet with WiMAX 2+
Illuminating
Indicates that the product is connected to the cradle (sold separately) with wireless LAN access point mode
③ Firmware update notification
Illuminating
Indicates that a new firmware has been released and update is required
(blue)
④ Status of wired connection
Illuminating
Indicates that LAN is connected via USB
Illuminating
Indicates that the product is connected to the cradle (sold separately) and wired LAN
⑤ Status of Bluetooth® function
Illuminating
Indicates that Bluetooth® is on (the number on the lower right indicates the connected devices)
OFF
Indicates that Bluetooth® is off
⑥ Wireless LAN (Wi-Fi®) bandwidth
Indicates that the product is connected to the 2.4 GHz bandwidth (the number on the lower right indicates
Illuminating
the connected devices)
Indicates that the product is connected to the 5 GHz bandwidth (outdoors) (the number on the lower right
Illuminating
indicates the connected devices)
Blinking
Indicates that a DFS check is in progress
Indicates that the product is connected to the 5 GHz bandwidth (indoors) (the number on the lower right
Illuminating
indicates the connected devices)
⑦ Energy-Saving mode
Illuminating
Indicates that the product is running in Eco Mode
(green)
Illuminating
Indicates that the product is running with saving power when the remaining battery level is low in Normal
(green)
Mode
Illuminating
Indicates that the product is running in Normal Mode
Illuminating
Indicates that the product is running in High Performance Mode
⑧ Battery status
Illuminating
Indicates the remaining battery level on a scale of 6 levels
Illuminating
Indicates that the battery is being charged
⑨ Displaying data usage
Indicates the current data usage (value of data usage accumulated/value of set upper limits)
The ring around the values indicates the proportion used
Initialization Method
When the product is not operating properly or to bring back the default setting, perform initialization
by following the steps below. (This will delete all user settings and the screen display will change to
Japanese.)
1
Press the product's Power button
to display the home screen on the display.
2
From the home screen tap [Settings] - [Maintenance] - [Initialize].
3
Once the message "Restoring to the initial settings. Do you want to initialize this device?" is displayed
on the product's display (touch panel), tap [YES].
4
Initialization will be completed once the product has been reactivated.
Updating the Firmware
Follow the steps listed below to update the firmware.
1
Press the product's Power button
to display the home screen on
the display.
2
Once the message "There is new firmware available. Do you want to update?"
is displayed on the product's display (touch panel), tap [YES].
3
"Now updating the firmware... Please do not remove the battery pack."
is displayed while the update is processing.
4
When the update has been completed, the product will automatically
reactivate and the display will appear.
Firmware cannot be updated when the product is connected to the cradle (sold separately) and used in wireless LAN Access point mode.
Update the firmware when the product is removed from the cradle (sold separately) and "Access Point Mode" is set to "Disable".
Smartphone Application "NEC WiMAX 2+ Tool"
By using "NEC WiMAX 2+ Tool", an application designed exclusively for this product, it is possible to
view information about the product on your smartphone, etc. and perform operations to update the
firmware or switch to the idle state.
* The exclusive application enables remote-activation. Search the Google Play or App Store for "NEC WiMAX 2+ Tool" to download and
install this exclusive application.
* Settings cannot be done on this product with "NEC WiMAX 2+ Tool" while the display (touch panel) is on. In addition, operating
the product's display (touch panel) while doing settings via "NEC WiMAX 2+ Tool" may interrupt the settings being done with "NEC
WiMAX 2+ Tool". Tap the Power button
to turn off the display.
Be sure to configure the password before activating the exclusive application.
* If the message " 管理者パスワー ドが設定されていません 管理者パスワー ドを設定しますか (The administrator
password has not been set. Would you like to set the administrator password)" is displayed when the exclusive application
is activated, set the password by following the instructions on-screen.
Administrator Password Memo
* Write it down in the location
● Take note of the administrator password as it will be required in order to configure the product.
described in the enclosed
If you have forgotten the administrator password, it will not be possible to access the screen
つなぎかたガイ ド
"Setup
of the Quick Setting Web and it will be necessary to initialize the product and redo all
Guide" (Japanese).
configurations.
■ Aterm is a registered trademark of NEC Corporation.
■ らくらく無線スター ト
and
らくらくQRスター ト
are registered trademarks of NEC Platforms, Ltd. ■ Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ■ Mac, Macintosh, Mac OS, macOS, OS X,
iPad, iPhone and iPod touch are trademarks of Apple Inc. registered in the United States and/or other countries. App Store is a service mark of Apple Inc. ■ The iPhone trademark is used under license from Aiphone Co., Ltd. ■ Internet Explorer is a trademark or registered trademark of Microsoft Corporation
in the United States and/or other countries. ■ Firefox® is a trademark or registered trademark of US Mozilla Foundation in the United States and/or other countries. ■ Opera is a trademark or registered trademark of Opera Software ASA. ■ Android and Google Play are trademarks or registered trademarks
of Google Inc. ■ Bluetooth and the Bluetooth logo are trademarks registered to Bluetooth SIG, Inc., and are being used under license. ■ "QR Code" is a registered trademark of DENSO WAVE INCORPORATED. ■ Other company names, brand names, service names and so on are trademarks or registered
trademarks of their respective owners. TM and the ® mark may be omitted in this manual.
© NEC Platforms, Ltd. 2016-2017 This manual may not be duplicated or altered, or duplicate copies of the manual distributed, without prior written permission from NEC Platforms, Ltd.
<Numerics input screen>
<Quick Menu>
Numerics
input
* [Firmware Update] is displayed when there
(Example) Input screen for the upper limit values
is a new firmware update.
of data usage
<Settings message display>
Explanation
This is displayed while doing settings for the product.
Displays during
communication
When
When
sending
receiving
<Lock screen>
<Display while idling>
This is displayed when the Power button
is pressed.
Product Specifications
■ Main Unit
Physical dimensions (W × H × D)
Approx. 99 (W) × 62 (H) × 13.2 (D) mm
Weight
Approx. 110 g (Battery pack attached)
USB connector (micro B-type) × 1
*3
Interface
Compliant with Bluetooth 4.0 Wireless Technology
Display (touch panel)
2.4 inches (320 × 240 dots) color LCD
AC adapter
Power supply
AC 100 V to 240 V ± 10%, 50/60 Hz
Battery pack
Lithium-ion, 3.85 V, 2,890 mAh
Waiting state: Approx. 45 hours
Continuous standby time
*1
Idle state (Remote start available): Approx. 1,100 hours
High Performance Mode
WiMAX 2+ (4 × 4 CA communication): Approx. 440 minutes
WiMAX 2+ (2 × 2 CA communication) → (2 × 2 MIMO communication):
Continuous communication time
*1 *2
Normal Mode
(During Wi-Fi® connection)
Approx. 600 minutes
*4
Eco Mode
WiMAX 2+ (2 × 2 MIMO communication): Approx. 740 minutes
High Performance Mode
WiMAX 2+ (4 × 4 CA communication): Approx. 580 minutes
Continuous communication time
*1
WiMAX 2+ (2 × 2 CA communication) → (2 × 2 MIMO communication):
Normal Mode
(During Bluetooth® connection)
Approx. 900 minutes
*4
Eco Mode
WiMAX 2+ (2 × 2 MIMO communication): Approx. 990 minutes
Operating temperature range: 5°C to 35°C (with no condensation)
Operating environment
Operating humidity range: 35% to 85% (with no condensation)
Approx. 200 minutes (when using the AC adapter (NAD11PQA) (sold separately) and the microUSB cable
Charging time
(packaged item))
Approx. 140 minutes (when using the common AC adapter (0501PWA/0501PWV) (sold separately))
*1: The continuous standby time and continuous communication time may vary depending on the communication network being used.
*2: The continuous communication time when connected to a single wireless LAN (Wi-Fi®) device.
*3: Use of USB2.0 or later is recommended as a sufficient transfer rate cannot be achieved with USB1.1. It should be noted that operation is not
guaranteed with all computers that are supported.
*4: The mode switches if the amount of battery remaining is low and the product continues to not communicate.
■ WAN
Communication methods
WiMAX 2+
Supported frequencies
2.6 GHz
■ LAN
Communication methods
Wi-Fi (compliant with IEEE802.11ac/n/a/g/b), compliant with Bluetooth 4.0 Wireless Technology
Supported frequencies
Wi-Fi®: 2.4GHz / 5GHz, Bluetooth®: 2.4GHz
WEP (128 bit)
WPA2-PSK (AES)
Wi-Fi security methods
WPA / WPA2-PSK (AES)
WPA / WPA2-PSK (TKIP/AES)
Maximum number of simultaneous
Wi-Fi®: 10 devices / USB: 1 device / Bluetooth®: 3 devices
connections
■ microUSB cable
Length
Approx. 1.0 m
Weight
Approx. 30 g
microUSB cable
USB plug: Type A
Interface
microUSB plug: Type B
This product can be used on OSs, such as Windows®, Macintosh,
Windows® 10 supporting:
Android (7.0/6.0/5.1/5.0/4.4/4.3/4.2/4.1/4.0) supporting:
• Microsoft Edge
• Google Chrome
and Linux, that comply with the TCP/IP protocol stack (use limited
(*)
to Japanese versions of the OS).
• Internet Explorer 11.0
iOS (10.0/9.3/9.2/9.1/9.0/8.4/8.3/8.2/8.1/8.0/7.1/7.0/6.1/6.0)
* Some functions may not work using Microsoft Edge. In that case,
supporting:
However, the following OSs are supported during USB connection.
• Safari
use Internet Explorer.
Windows® 10, Windows® 8.1, Windows® 8, Windows® 7 (SP1 and
Windows® 8.1 supporting:
later) Japanese version, 32 bit (x86) version and/or 64 bit (x64)
• Internet Explorer 11.0
version, Japanese version of Windows Vista® (SP2 and later) 32 bit
Windows® 8 supporting:
(x86) version and macOS Sierra v10.12 (Intel), OS X v10.11 (Intel),
• Internet Explorer 10.0 / 11.0
v10.10 (Intel), v10.9 (Intel), v10.8 (Intel), v10.7 (Intel), Mac OS X
Windows® 7 (SP1 and later) supporting:
v10.6 (Intel), v10.5 (Intel) Japanese version.
• Internet Explorer 8.0/9.0/10.0/11.0
The following Web browsers are available when performing
Windows Vista® (SP2 and later) supporting:
settings in the Quick Setting Web.
• Internet Explorer 7.0/8.0/9.0
Also, the supported products include the following OS pre-installed
macOS Sierra v10.12/OS X v10.11/v10.10/v10.9/v10.8/v10.7/Mac
products, or products which are guaranteed by manufacturers
OS X v10.6/v10.5 supporting:
to use with the following OSs. (Self-made computers are not
• Safari
supported.) (As of October, 2016)
October, 2017, 2nd Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: NEC Platforms, Ltd.
Advertisement
