Advertisement
AP/SOLDERING FEED STATION
CONTENTS
INSTALLATION /
I.E.CONNECTION
CONTROL UNIT
AP-2A
Connectable tools: AP
HEAT MANAGEMENT
JBC stations intelligently manage the tool temperature:
Work mode: When the tool is used, pre-set work temperature is 350º C.
Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
Hibernation mode: After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and
the tool cools down to room temperature.
WORK
The advantage of this heat management is lifespan increase which ensure low cost of ownership.
2
TOOL
AP-A
Cartridge C130
220
SLEEP
220
room
temperature
time
AP
SOLDERING FEED
STATION
Reference Guide
HIBERNATION
time
Advertisement
