Samsung UN19F4000 User Manual page 2

Videos Other Restrictions
y Codecs may not function properly if there is a problem with the
Movie 01.avi ► 00:04:03 / 00:07:38 content.
1/1
y Video content will not play or will not play correctly if there is an
error in the content or container.
y Sound or video may not work if they have bit rates/frame rates
above the TV's compatibility ratings.
y If the Index Table contains an error, the Seek (Jump) function
will not work.
SUM E Pause L Jump T Tools R Return y When the TV is playing video over a network connection, the
1. In the Media Play menu, press the ◀ or ▶ button to select video may not play smoothly because of data transmission
speeds.
Videos, and then press the ENTERE button.
2. Press the ◀/▶/▲/▼ buttons to select a video in the file list. y Some USB/digital camera devices may not be compatible with
the TV.
3. Press the ENTERE button or ∂ (Play) button.
- y When the TV is playing a video at a bit rate of 10 Mbps or higher,
The file name is displayed on the top of the screen with
the menu screens may be displayed slowly.
the playing time.
- Video Decoder
If video time information is unknown, playing time and
the progress bar are not displayed.
Supports up to H.264, Level 4.1
-
During video playback, you can search using the ◀ and ▶
H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.
buttons.
GMC 2 or above is not supported.
✎ In this mode, you can play movie clips contained in a game,
Audio Decoder
but you cannot play the game itself.
WMA 10 Pro supports up to 5.1 channels. Supports up to the M2
y Supported Subtitle Formats
profile. WMA lossless audio is not supported.
-
External
QCELP and AMR NB/WB are not supported.
Name File extension
Vorbis is supported for up to 2 channels.
MPEG-4 timed text .ttxt
Dolby Digital Plus is supported for up to 5.1 channels.
SAMI .smi
The DTS LBR codec is only available for MKV / MP4 /TS
SubRip .srt
containers.
SubViewer .sub
Micro DVD .sub or .txt
Music
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
I Love You.
mp3 Playlist 3/15
-
Internal
1st Album I Love you
Pop Jhon
Name Container Format 2010 Music 1
4.2MB
No Singer
Music 2
Xsub AVI Picture Format
No Singer
Music 3
SubStation Alpha MKV Text Format
No Singer
Music 4
01:10 / 04:02
No Singer
Advanced SubStation Alpha MKV Text Format
Music 5
No Singer
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format E Pause L Jump T Tools R Return
USB
y Supported Video Formats 1. In the Media Play menu, press the ◀ or ▶ button to select
Music, and then press the ENTERE button.
File Frame Bit rate Audio
Container Video Codec Resolution
Extension rate(fps) (Mbps) Codec
2. Press the ◀/▶/▲/▼ buttons to select the desired Music in the
Motion JPEG 640x480 8 file list.
*.avi
*.mkv H.264 BP/ 3. Press the ENTERE button or (Play) button.
Dolby ∂
MP/HP
*.asf Digital
✎ During music playback, you can search using the ◀ and
LPCM
*.wmv AVI H. 264 BP /
▶ button.
MP / HP ADPCM
*.mp4 MKV
✎ � (REW) and µ (FF) buttons do not function during
(IMA, MS)
*.mov ASF Divx 3.11 / 4
play.
AAC
*.3gp MP4 / 5 / 6
HE-AAC
*.3gpp 3GP ✎ Media Play only displays files with an MP3 or PCM file
MPEG4 SP/
MAX 30
WMA
*.mpg MOV ASP extension. Other file extensions are not displayed, even if
1920x1080 30
Dolby
*.mpeg FLV they are saved on the same USB device.
Window
Digital
*.ts VRO Media Video
Plus
✎ If the sound is abnormal when the TV plays MP3 files, adjust
*.tp VOB v9(VC1)
MPEG(MP3)
the Equalizer in the Sound menu. (An over-modulated MP3
*.trp PS
DTS (Core ,
MPEG2
file may cause a sound problem.)
*.mov TS
LBR)
*.flv G.711(A-
Law, μ-Law)
*.divx MPEG1
*.dat
*.webm WebM VP8 1920x1080 6~30 20 Vorbis
- 9 -
Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on
the TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting
a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or
satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation
Guide.
Cannot find a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture First, perform the Picture Test and to see if your TV is displaying the test image properly.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as • If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
it did in the store. deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
✎
Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted has macroblock • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization. sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
The color is wrong or missing. • If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of • If the picture size is set to Screen Fit, change it to 16:9.
the screen.
• Change the cable/satellite box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input
1 on the TV.
When changing channels, the picture • If the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord, and
freezes or is distorted or delayed. then wait until the cable box reboots. It may take up to 20 minutes.)
• Set the output resolution of the cable box to 1080i or 720p.
Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good, but there is no • If you are using an external device, check the device's audio output option Ex. you may need to change your
sound. cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device's power cable.
The speakers are making an • Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
- 13 -
Photos Media Play - Additional Functions
■ Videos/Music/Photos Play Option menus
Normal Image1024.jpg 1024x768 2010/2/1 3/15
When playing a file, press the TOOLS button.
Category Operation
You can select another video file
Title
to play directly.
You can play movie and music
Repeat Mode
files repeatedly.
You can adjust the picture size to
Picture Size
E Pause L Previous/Next T Tools R Return your preference.
1. In the Media Play menu, press the ◀ or ▶ button to select
SUM You can adjust the picture
Picture Mode
setting.
Photos, then press the ENTERE button.
Sound Mode You can adjust the sound setting.
2. Press the ◀/▶/▲/▼ buttons to select a photo in the file list.
You can play the video with
3. Press the ENTERE button or ∂ (Play) button.
Subtitle Subtitles. This function only
✎ NOTE
Settings works if the subtitles have the
same file name as the video.
x
While a photo list is displayed, press the ∂ (Play) / ENTERE
button on the remote control to start a slide show. You can select the digital audio
Audio Format
output format.
x
All files in the file list section will be displayed in the slide
show. You can change the audio
Audio
x During the slide show, files are displayed in order. language if the video has more
Language
than one language.
x During the slide show, you can adjust the slide show speed
using (�) (REW) or (µ) (FF) button. Stop Slide
Show /
x You can start or stop a Slide
You can move to other files using ◀ or ▶ button.
Start Slide Show.
✎ Media Play can play Music files automatically during a Slide
Show
Show if Background Music is set to On.
Slide Show You can select the slide show
✎ You cannot change the Mode in Background Music until the Speed speed during the slide show.
Background Music file has finished loading.
You can set and select
Background
background music when
y Supported Photo Formats Music
watching a Slide Show.
You can zoom into images in full
Image Photo Resolution
Zoom
screen mode.
Base-line 15360 x 8640
You can rotate images in full
JPEG
Rotate
screen mode.
Progressive 1024 x 768
You can see detailed information
Other Restrictions Information
about the played file.
y CMYK, YCCK Color space JPEG are not supported.
Settings
Playing Multiple Files
Using the Setup Menu
■ Playing selected video/music/photo files
■ DivX® Video On Demand: Shows the registration code
1. On the File List screen, highlight a file, and then press the
authorized for the TV. If you connect to the DivX web site and
Yellow button on your remote.
register with the 10-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
2. Repeat Step 1 to select multiple files.
registration is completed.
✎
NOTE
✎ For more information on DivX® VOD, visit "http://vod.
x A c mark appears to the left of the selected files.
divx.com".
x To cancel a selection, press the Yellow button again.
■ Information : Select to view information about the connected
x
To deselect all selected files, press the TOOLS button, select
USB device.
Deselect All, and then the ENTERE button.
3. Press the TOOLS button, select Play Selected Contents, and
❑ Using Sports Mode t
then press the ENTERE button.
■ Playing a video/music/photo folder
This mode provides optimized conditions for watching soccer and
1. With the folders on your USB device displayed, use the other sports.
◀/▶/▲/▼ buttons to highlight a folder.
y A (Zoom): Pauses playback and divides the picture into 9 parts.
Select a part to zoom it in.
2. Press the TOOLS button, select Play Folder, and then press the
button . ✎ When Sports Mode is On, the picture and sound modes are
ENTERE
set to Stadium automatically.
✎ If you turn the TV off while Sports Mode is on, Sports Mode
is turned off.
- 10 -
There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source by pressing the SOURCE button on the remote control.
• Reboot the connected device by unplugging and then reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list.
Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock, • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization. sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the
and buzzing noise from the TV speakers set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
with Component cable connection.
The picture will not display in full • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
screen.
• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on
the TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn the TV on or off, or adjust the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message • Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears. resolution settings in this manual.
Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV. • This smell is normal and will dissipate in a few days.
TV Signal Strength is unavailable in the • This function is only available for digital channels received through an Antenna / RF/Coax connection.
Self Diagnosis Test menu.
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.
The Channel menu is grey out • The Channel menu is only available when you select the TV source.
(unavailable).
Your settings are lost after 30 minutes • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
or every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE
mode, go to MENU → Setup → Plug & Play → ENTERE.
You have intermittent loss of audio • Check the cable connections and reconnect them.
or video.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look • This is part of the product's design and is not a defect.
closely at the edge of the frame of
the TV.
POP (TV's internal banner ad) appears • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there
may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎ You can watch detailed troubleshooting videos at www.samsung.com/spsn.
✎ Some functions and pictures shown in this manual are available on specific models only.
✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com
→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
- 14-
x Do not fasten the screws too firmly. This may damage the
Support Menu
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
x
Self Diagnosis Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
■ Picture Test: Use to check for picture problems. If the problem
consumer fails to follow the product installation instructions.
Videos Music Photos
appears in the test picture, select Yes and follow the directions x Do not mount the TV at more than a 15 degree tilt.
c on the screen.
x Always have two people mount the TV on a wall.
■ Sound Test: Use the built-in melody sound to check for sound
c c
problems. If the problem occurs during the test, select Yes and Product
Family
follow the directions on the screen.
c
■ Signal Strength: (Digital channels only) An HD channel's
LED-TV
reception quality is either perfect or the channels are
c c
unavailable. Adjust your antenna to increase signal strength.
■ Reset: Reset all settings to the factory defaults.
c c c
✎ The PIN input screen appears before the setup screen.
✎ Enter your 4-digit PIN. Change the PIN using the Change
c
PIN option.
Software Upgrade
Securing the TV to the Wall
c
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
c
Use Mode
You can turn the TV into a display model for retail environments by
c
setting Use Mode to Store Demo.
✎
For all other uses, select Home Use.
c
✎ With Store Demo, some functions are disabled, and the TV
To prevent the TV from falling
automatically resets itself after a preset amount of time.
c
✎ Since the necessary brackets, screws, and string or cable are
HD Connection Guide
not supplied, please purchase these separately.
Refer to this information when connecting external devices to
c 1. Insert the screws into the wall brackets and firmly fasten them
the TV.
to the wall. Make sure the screws are firmly fixed to the wall.
c ✎ We strongly recommend you drive the screws into a stud.
Contact Samsung
2. Using screws, insert the screws through the TV brackets, and
View this information when your TV does not work properly or
c c c then fasten the screws to the top VESA screw holes on the back
when you want to upgrade the software. You can find information
of the TV.
regarding our call centers and how to download products and
3. Connect the brackets on the TV and the brackets on the wall
software.
with a strong string or cable, and then tie the string or cable
tightly to the brackets.
Other Information
✎ Verify all connections are properly secured. Periodically
check the connections for any sign of fatigue or failure. If
Installing the Wall Mount Kit you have any doubt about the security of your connections,
contact a professional installer.
The wall mount kit (sold separately) allows you to mount the TV
✎ Install the TV close to the wall so that it does not fall.
on the wall.
✎
Connect the string or cable so that the brackets on the wall
For detailed information about installing the wall mount, see the
are at the same height or lower than the brackets on the TV.
instructions provided with the wall mount items. Contact a technician
Untie the string or cable before moving the TV.
for assistance when installing the wall mount bracket. Samsung
✎ To purchase a TV Holder kit, contact Samsung customer
Electronics is not responsible for any damage to the product or injury to
care.
yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
✎ NOTE
x Standard dimensions for wall mount kits are shown in the table below.
x
When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
x
Do not use screws that do not comply with the VESA standard
screw specifications.
x Do not use screws that are longer than the standard dimension or
do not comply with the VESA standard screw specifications. Screws
that are too long may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
- 11 -
Storage and Maintenance
✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully
using a soft cloth to prevent scratches.
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or
electric shock.
License
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD
section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS,
Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source Announcement
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).
button to select TV
- 15 -
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer
to the manual provided with the Kensington Lock for additional
information on proper use.
✎
Please find a "K" icon on the rear of the TV. The Kensington
slot is beside the "K" icon.
✎ The position and color may differ depending on the model.
TV size in VESA screw hole specs Standard
Quantity
inches (A * B) in millimeters Screw
Assembling the Cable manager
19 75 X 75 M4 4
Do not install your Wall Mount Kit while
your TV is turned on. It may result in
personal injury due to electric shock.
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply,
visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Problem Possible Solution
Flickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy
efficiency features such as the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
y Energy saving : MENU → Setup → Eco Solution → Energy Saving → Select Settings
Component Connections / If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self
Diagnosis Test on the TV to make sure there are no device issues.
Screen Color
y Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
y If the test is ok, try making sure ;
y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.
Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some
settings you should check before calling for a repair.
y Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.
Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
y Sleep Timer : User Menu → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
y Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Clean the product with a soft cloth
Storage Humidity
dampened with in a small amount of
Model Name
water. Do not use a flammable liquid
(e.g. benzene, thinners) or a cleaning Display Resolution
agent.
Screen Size
(Diagonal)
Sound
Output
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
✎ Design and specifications are subject to change without prior notice.
✎
This device is a Class B digital apparatus.
✎ For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.
✎
Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/
recyclingdirect or call, (877) 278-0799.
JACK PANEL DETAIL / REAR VIEW
Model name 1
UN19F4000 3.0
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to
performing installation of your TV. Not responsible for typographical or printed errors.
© 2016 Samsung Electronics America, Inc
Display Modes (HDMI/DVI Input)
Optimal resolution: 1366 x 768@60Hz
Horizontal Vertical Pixel Clock Sync
Mode Resolution Frequency Frequency Frequency Polarity 1366 × 768
(KHz) (Hz) (MHz) (H / V)
IBM 720 × 400 31.469 70.087 28.322 -/+ c
640 × 480 35.000 66.667 30.240 -/- c
MAC 832 × 624 49.726 74.551 57.284 -/-
c
1152 × 870 68.681 75.062 100.000 -/-
640 × 480 31.469 59.940 25.175 -/- c
640 × 480 37.861 72.809 31.500 -/- c
640 × 480 37.500 75.000 31.500 -/- c
800 × 600 37.879 60.317 40.000 +/+
c
800 × 600 48.077 72.188 50.000 +/+ c
800 × 600 46.875 75.000 49.500 +/+ c
1024 × 768 48.363 60.004 65.000 -/- c
VESA
1024 × 768 56.476 70.069 75.000 -/-
c
DMT
1024 × 768 60.023 75.029 78.750 +/+ c
1152 × 864 67.500 75.000 108.000 +/+
1280 × 720 45.000 60.000 74.250 +/+ c
1280 × 800 49.702 59.810 83.500 -/+
1280 × 1024 63.981 60.020 108.000 +/+
1280 × 1024 79.976 75.025 135.000 +/+
1366 × 768 47.712 59.790 85.500 +/+ c
- 12 -
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
UN19F4000
1366 x 768
19" Class
(18.5" measured diagonally)
3W x 2
17.8 X 11.0 X 1.9 inches
(453.7 X 281.3 X 49.5 (mm))
17.8 X 12.3 X 4.9 inches
(453.7 X 314.2 X 124.9 (mm))
5.5 lbs (2.5 kg)
5.7 lbs (2.6 kg)
(Unit: inches)
2 3 4 5 6
3.1 2.5 6.9 2.9 2.9
- 16 -