CLERMONT COUNTY PUBLIC LIBRARY Pocket Wi-Fi Quick Start Manual

1. What's in the box

2. Before you start

Charge the device
1. Plug the micro-USB cable into the device.
2. Plug the other end of the cable into the AC
adapter and plug the adapter into an electrical
outlet.
3. Charge until the battery charge indicator shows
the battery is fully charged.
Get ready
1. Make sure you are in an area covered by the Sprint
3G or 4G LTE network (not roaming).
2. If you have a LAN connection, disconnect it.
3. Make sure your computer's Wi-Fi (wireless connection)
mode is turned on.
When your checkout period is over, return the device to a Clermont County Public Library. The Pocket
Wi-Fi will become inoperable if not returned within three days of the due date listed on the register
receipt. For every day the device is overdue, you will be charged a $1 overdue fee.
Pocket Wi-Fi (Library Mobile HotSpot)
QUICK START GUIDE
4. Return to the Library

3. Get connected

Power up the device
If the device is not powered on, slide the power button to
the right on the top. This will power it on
• The device will automatically activate. You will see
instructions to connect your first device to the
Wi-Fi network. (If the device does not activate, an
alert will appear.)
Note: It can take several minutes for your device to
connect with the Sprint Network.
Wirelessly connect your computer
After it's activated, you will need to locate the Wi-Fi name
and password. On the Pocket Wi-Fi, tap the Lock Button to
turn on the screen, then tap the Lock Icon on the screen.
Tap Wi-Fi where you will see the Wi-Fi name (SSID) and
Password. You will need this information to connect your
Wi-Fi devices (PC, laptop, tablet) to the network.
1. From your computer, display the Wireless Network
Connections window and then click View Wireless
Networks.
2. Select the wireless network name as displayed on the
Pocket Wi-Fi (SSID), click Connect and enter your Wi-Fi
password, also displayed on the Wi-Fi screen.
3. Launch your computer's Web Browser.