Technical Specifications; Service; Warranty; Copyright, Trademarks - Pro-Ject Audio Systems Power Box S2 Instructions For Use

Hide thumbs Also See for Power Box S2:

Table of Contents

Technical specifications Pro-Ject Power Box S2

Output voltage / current:

Outboard power supply:

Dimensions W x H x D, weight:

Weight:

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit

be sent to the responsible distributor in your country.

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons, release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

1x20V/3A (2.1mm)

1x15V/500mA (2.1mm)

1x5V/1A (USB A)

20V/3A DC, suitable for your country's mains supply

106 x 37 x 103 mm

360 g

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

Table of Contents

Need help?

Do you have a question about the Power Box S2 and is the answer not in the manual?