Advertisement
Quick Links
TBox-1x & TBox-2x User manual
1. Appearance
Ext GPS antenna
(TBox-2x only)
Power Status LED
2. Power ON/OFF
The ON/OFF switch has 3 functions:
1) Switch ON / OFF the TBox
a) Press briefly the ON/OFF button (0.5s – 1.5s) until the battery status is indicated
on the Input's LED's 1 – 4
b) Release the ON/OFF button and repress it within 1 second, and hold down until
the 4 inputs LEDs are ON, and the audible beep signal is emitted
the buzzer is not deactivated)
Battery status
2)
Press and hold the ON/OFF button
The Inputs LEDs (1 – 4) will illuminate to indicate the battery charge status
4 LEDs ON green: 75-100 %
3 LEDs ON green: 50-75%
2 LEDs ON green: 25-50%
1 LED ON green:
1 LED ON red :
Reactivate Bluetooth advertising
3)
September 2017 - Version EN 1.1
www.fdstiming.com
4 Jack Inputs
ON/OFF Switch
10-25%
< 10% (TBox will only power on with external power applied)
4 inputs LEDs
4 manual inputs
switches
Sync Jack
RS232 Jack
Mini USB
GPS LED (TBox-2x only)
(provided that
Advertisement
Related Manuals for FDS TBox-1 series
Summary of Contents for FDS TBox-1 series
- Page 1 TBox-1x & TBox-2x User manual 1. Appearance 4 Jack Inputs 4 inputs LEDs Ext GPS antenna 4 manual inputs (TBox-2x only) switches Sync Jack RS232 Jack Mini USB GPS LED (TBox-2x only) Power Status LED ON/OFF Switch 2. Power ON/OFF The ON/OFF switch has 3 functions: 1) Switch ON / OFF the TBox a) Press briefly the ON/OFF button (0.5s –...
-
Page 2: Power Status Led
• External power supply and battery charging • COM port emulation for RS232 communication and data transfer - Real time of day in many formats (FDS, TAG Heuer, Alge, Seiko) - Configure the TBox options and parameters (with the app “TBox-Setup”) •... - Page 3 Jack-Stereo connection 3.5mm. In conjunction with the TBox-Setup, the protocol output can be configured by the user. • FDS / TAG Heuer / Alge / Seiko Time of day protocol • Serial printer • Display Output (TAG Heuer / Alge Protocol)
- Page 4 4 inputs 9. Bluetooth A Bluetooth connection can be established with compatible FDS timing or setup Apps. After power up, the TBox advertises its presence for 2 minutes. During this period the box can be detected and connected by the user App. To re-establish detection after the 2 minute period simply momentarily press the power button to reactivate the Bluetooth advertising process.
-
Page 5: 11. Technical Specifications
TBox-1x & TBox-2x User manual 10. How to update the TBox Firmware Update the firmware is an easy task. No software is required. Copy and paste the “.bin” file to the USB Flash Drive root directory of the TBox. Note that you should have only ONE firmware file on the drive. If you want to save the previous “.bin”... - Page 6 The sale of products, services of goods governed under this publication are covered by FDS’s standard Terms and Conditions of Sales and this product publication is provided solely for informational purposes.