Table of Contents
Advertisement
ATTENTION!
Measuring directly on the line voltage can be very dangerous.
The outside of the BNC connectors at the Handyscope HS3 are connected
with the ground of the computer. Use a good isolation transformer or a dif-
ferential probe when measuring at the line voltage or at grounded power
supplies! A short-circuit current will flow if the ground of the Handyscope
HS3 is connected to a positive voltage. This short-circuit current can damage
both the Handyscope HS3 and the computer.
Copyright ©2018 TiePie engineering.
All rights reserved.
Revision 2.22, August 2018
Despite the care taken for the compilation of this user man-
ual, TiePie engineering can not be held responsible for any
damage resulting from errors that may appear in this man-
ual.
Advertisement
Table of Contents
Need help?
Do you have a question about the Handyscope HS3 and is the answer not in the manual?