AVM RC5 Operating Instructions

System remote control for avm c8; avm c9

Advertisement

Quick Links

Changing batteries

If the hi-fi set doesn't react or reacts only over short distances, the batteries
of the RC5 must be changed.
Unscrew the 2 marked screws (CAUTION, do NOT unscrew the 2
unmarked screws in the middle). Take the bottom plate with the mounted
pcb out. Remove the worn batteries and replace them with two new
batteries (type CR2032, 3V Lithium cells). Make sure that polarity is correct
(the "+" sign must be on top). Insert the bottom plate and screw it tight.
Declaration of conformity (for EC only)
We herewith confirm, that the unit to which this manual belongs fulfills the
EC rules necessary to obtain the sign
the necessary measurements were taken with positive results.
AVM Audio Video Manufaktur GmbH, Daimlerstraße 8,
D-76316 Malsch, Germany
Bottom view

Operating instructions

AVM – system remote control RC5
for C8 / C9
AVM Audio Video Manufaktur GmbH, Daimlerstraße 8, D-76316 Malsch

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC5 and is the answer not in the manual?

Questions and answers

Summary of Contents for AVM RC5

  • Page 1: Operating Instructions

    We herewith confirm, that the unit to which this manual belongs fulfills the EC rules necessary to obtain the sign the necessary measurements were taken with positive results. AVM Audio Video Manufaktur GmbH, Daimlerstraße 8, D-76316 Malsch, Germany AVM Audio Video Manufaktur GmbH, Daimlerstraße 8, D-76316 Malsch...
  • Page 2 You for purchasing this AVM product. Before using it, please read this manual Buttons for switching ON and OFF (stand by). The LED in the middle carefully. After that You will know how to use Your new AVM component in the flashes while a button is pressed.

Table of Contents