Auto Retract Introduction The Smart Jack™ features a high-efficiency motor, a new streamlined plastic shroud, and a new user interface. These features, along with the single power lead and the hitch height memory, give the end user a perfect reason to replace the traditional tongue jack with a far superior product.
Chock all tires. Support trailer according to OEM recommendations. If necessary, remove footpad from the Smart Jack's Power Tongue Jack leg (Fig. 1). A. Remove hairpin cotter pin and clevis pin holding the footpad in place. B. Set the pins and footpad aside.
Page 4
Fig. 3 Align the 3 holes in the Smart Jack™ mounting plate (Fig. 3A) with the 3 holes in the coupler (Fig. 3B). Secure the Smart Jack™ to the coupler with three 3/8" - 16 x 1" serrated flange grade 5 zinc coated bolts (Fig.
Fig. 5 Operation NOTE: The hitch height MUST be set in the memory prior to the normal operation of the Smart Jack™. Failure to do so will cause the Smart Jack™ and the trailer to not function as intended. NOTE: To cancel an action, press either the up arrow or down arrow (Fig. 5A or 5B). The action in progress will stop.
Page 6
LCI representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of LCI. Revised editions are available for free download from lci1.com.