Table of Contents
Advertisement
Quick Links
PDL Thermosafe Ceiling Sweep Fans
Installation Guide
4HS1200WH, 4HS1400WH, 4HS1200SS, 4HS1400SS, 4JH1200WH,
4JH1400WH, 4JH1200SS, 4JH1400SS
Thank you for purchasing this PDL Thermosafe Ceiling Sweep Fan. You can be assured of years of trouble free operation by
installing your ceiling fan carefully according to these instructions. Please read all the instructions before commencing, then
complete each step in order from one to eight.
INCLUDED WITH YOUR FAN
A. Motor Assembly
B. 4 x Blades
C. 3-Speed Fan Controller
Hangsure Bracket or J-Hook Bracket
IMPORTANT NOTES
1. To ensure proper balance, the blades are a matched set. Do
not mix-up the blades with those from another fan.
2. Transport and transit handling may loosen factory fitted cables.
Please check and secure terminal screws before installation.
PROTECTING THE FAN
Do not place the motor directly onto a flat surface.
The plastic nipple underneath the motor cannot support the weight
of the motor and may be easily damaged. When working on the
fan, place the motor on the foam packaging with the nipple located
in one of the recesses. This protects the nipple and the finish.
PM-119PDLA
D. Screw Pack
E. Mounting Bracket
F. Instruction Sheet
All electrical work must be carried
out by a qualified electrician.
CLEARANCES AND ANGLED CEILINGS
CONTROLLING A SINGLE FAN
This fan has been supplied with a quality PDL 3 Speed Controller
that is designed to operate a single fan.
1
Hangsure Mounting
Suitable for pitched ceilings
with a maximum angle of 18.5˚.
Rev0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PDL Thermosafe 4HS1200WH
Summary of Contents for PDL Thermosafe 4HS1200WH
- Page 1 4JH1400WH, 4JH1200SS, 4JH1400SS Thank you for purchasing this PDL Thermosafe Ceiling Sweep Fan. You can be assured of years of trouble free operation by installing your ceiling fan carefully according to these instructions. Please read all the instructions before commencing, then complete each step in order from one to eight.
- Page 2 1. MOUNTING THE FAN SUPPORT BRACKET 3. CONNECTION OF THE LIGHT FITTING Select a suitable location to mount the fan support bracket. If you are attaching a light fitting to the fan, do so prior to hanging the fan. Note that Clipper Light (CL) and Oyster Light (OL) may be The mounting bracket must be fixed to a solid structural member installed in fans which are constructed for this purpose.
- Page 3 7. CONNECTIING THE SPEED CONTROLLER WITH A LIGHT SWITCH All PDL Thermosafe Ceiling Sweep Fans are pre-wired to allow for a light to be fitted onto the fan. If you are not fitting a light to the fan, please disregard the light wires.
- Page 4 - Switch Off the fan. and Territory Laws. - Forward/Reverse switch on fan motor not fully engaged in The original purchaser of this PDL ceiling fan, is provided with the desired setting. following warranty, subject to the following conditions: - Connections not as per installation diagram.
Need help?
Do you have a question about the Thermosafe 4HS1200WH and is the answer not in the manual?
Questions and answers