Advertisement
Quick Links
FEATURES
ATTENTION: Computer Functions refer to the packing details.
4 5 7 9 13 16
FUNCTIONS
Speedometer (SPD)
- 0~99.9 KM/hr or M/hr
Tripmeter (DST)
- 0~999.9 KM or M
Odometer (ODO)
- 0~9999.9 KM or M
Auto Trip Timer (TM)
- 9: 59' 59"
Maximum Speed (MXS)
- 0~99.9 KM/hr or M/hr
Average Speed (AVS)
- 0~99.9 KM/hr or M/hr
Scan
- for DST, MXS, AVS, TM
Freeze Frame Memory
- for TM, AVS, DST
Speed Comparator
- (+ or -)
Digital Clock
12 / 24 hour selectable
Speed Tendency
or
Odometer Save Function
Temperature
(-10°C to +50°C)
°C / °F Selection
Maintenance Program
*EL BACKLIGHT (OPTIONAL)
TRIPMETER (DST)
(Trip Information Reset Mode)
Trip distance measurement is indicated by
DST and is displayed on the bottom line.
Tripmeter is activated automatically with
speedometer input. Reset DST to zero by
pressing the LEFT button for 2 seconds;
DST (Trip distance), TM (Trip Timer) & AVS
(Average Speed) will also be reset at that
time.
Press the RIGHT button to enter
MXS mode.
MAXIMUM SPEED (MXS)
Maximum speed measurement is indicated
by MXS and is displayed on the bottom
line. Maximum speed is stored in memory
and updated only when a higher speed is
reached. To reset MXS, press and hold the
RIGHT button to enter AVS mode.
AVERAGE SPEED (AVS)
Average Speed measurment is indicated
by AVS and is displayed on the bottom line.
AVS is calculated with the Trip Timer (TM),
so AVS is the average speed only while
riding. Press the RIGHT button to enter TM
mode.
COMPUTER
Slide the computer onto the mounting bracket until it snaps
firmly into position. Press the release button to take out the
computer as shown in Fig. 1.
Fig. 1
Release
ATTENTION !! Refer to the appendix for installation reference.
TRIP TIMER (TM)
Trip timer measurement is indicated by TM
and is displayed on the bottom line. Trip
Timer is activated automatically with
speedometer input [On when you ride and
off when you stop.] It records only the time
spent actually riding.
Reset TM to zero by pressing the LEFT
button for 2 seconds in DST mode. Press
the RIGHT button to enter Temperature
mode.
TEMPERATURE
Press and hold LEFT button for 2 seconds,
" °C " will start to flash.
Press RIGHT
button to select " °C" or " °F" and press
LEFT button to confirm.
Press RIGHT button to enter the Scan
mode.
SCAN
The Scan mode allows DST, MXS, AVS
and TM to cycle on the screen without
pressing any keys.
Press the RIGHT
button to enter the Clock mode.
START / STOP
To start the unit, press the RIGHT button to turn on the display
and the wireless mounting system. To stop the unit, left unused
for over 5-6 minutes and then the computer will automatically
switch off to preserve batteries.
WHEEL SIZE INPUT
Press and hold LEFT and RIGHT buttons for 2 seconds or after
the replacement of battery, the unit is switched to wheel size
input mode. Multiply wheel diameter, d (Fig. 2) in millimeters by
3.1416 to determine wheel factor, c.
Press the LEFT button to select digit to be input and the RIGHT
button to adjust the digit to the desired number (hold for fast
advance). Press the LEFT button again to KM/MILE selection.
(Note: removing battery will erase Wheel Size Input)
For convenience you can refer to the chart of wheel diameter
size factor inputs.
Fig. 2
distance in millimeter
per one turn
FREEZE FRAME MEMORY
Press the LEFT button,
Freeze Frame
Memory can lock the display at the end of a
ride segment and information TM, DST and
AVS which will be flashing, can be read at a
later time by pressing the RIGHT button.
To release the memory, press the LEFT
button until the display digit is static again.
This is particularly useful when crossing
the finish line of a time trial, since the TM
cannot be stopped manually.
ODOMETER SAVE FUNCTION
The SAVE function allows you to keep the
important data of total distance (ODO)
even after replacement of battery.
To set ODO, after battery replacement and
wheel size setting, press RIGHT button to
ODO mode and then press and hold LEFT
button for 2 seconds until the last digit
flickering.
To adjust number, press the
RIGHT button. Press the LEFT button to
confirm. Repeat above sequence to reach
the desired odometer value.
Press the
LEFT button again to return to normal ODO
mode.
EL BACKLIGHT (OPTIONAL)
The EL backlight can be turned on either as follows:
1) Holding the RIGHT button for 2 seconds, the EL light will be
turned on for 8 seconds and the computer will then go to fast
scan mode with trip distance, maximum speed, average
speed and trip timer displayed once.
2) Press once on the LEFT Button, the EL light will be turned
on for 4 seconds and the comuter will go to the freeze frame
menory mode as well.
KM / MILE SELECTION
After the wheel size input, the following function is selection of
kilometers or miles as the measurement for distance. Press the
RIGHT button to choose between kilometer (KM) and Mile (M),
press the LEFT button to confirm.
MAINTENANCE PROGRAM
It is used to remind you for the parts replacement or to lubricate
the chains and wheels after the peset distance is reached.
Right after KM/ MILE selection, the preset total distance of
600km (or miles) will flash, press the RIGHT button to select
between 200, 400, 600 & 800km (or miles) and press LEFT
button to confirm.
For example, if 600 km is selected, the spanner (
) will flash
whenever the total distance (ODO) reach 600, 1200, 1800km
(or miles).
Press the LEFT button to stop flashing of spanner(
).
SPEED COMPARATOR
(Cadence)
A "+" or "-" sign appears to the right of the
speed. "+" indicates you are travelling
faster than your average speed (AVS). A
"-" indicates you are riding slower than your
average speed.
SPEED TENDENCY
(Acceleration & Deceleration)
A cyclist symbol appears to the left of the
speed. The wheel turns forward
to
indicate acceleration.
The wheel turns
backward
to indicate deceleration.
MALFUNCTION
PROBLEM
Inaccurate maximum
Unknown atmospheric or RF
speed reading
interference
No speedometer
Improper magnet/transmitter
reading
alignment
Check battery and correct
installation
Slow display
Temperature outside of operating
response
limits (0-55 °C)
Black display
Temperature too hot, or display
exposed to direct sunlight too long
No trip distance
Check correct transmitter / magnet
reading alignment
Check battery and correct
installation
Display shows
Take out computer battery and
irregular figures
install again
Art No.: BC-P3-GB
SPEEDOMETER (SPD)
Instantaneous Speed is indicated on the
top line. The range of measurement is
from 0 to 99 KM/ hr [0 to 99 M/ hr] and
accuracy is ± 0.5 KM/ hr [M/ hr].
CLOCK
(12H / 24H)
A 12 or 24-hour digital clock is indicated by
the flickering colon on the bottom line. To
switch between the 12 and 24 hour format
or to adjust time, press the LEFT button for
2 seconds. "24H" will start to flicker. Use
the
RIGHT
button
to
select
"12H"
for12-hour format or "24H" for 24-hour
format. Press the LEFT button to confirm.
Next the hour digits will start to flicker. Use
the RIGHT button to select the hour. To
change minutes, press LEFT button again.
The minutes will start to flicker. Use the
RIGHT button to select the minutes. Press
the LEFT button once more to return to
CLOCK Mode. Press the RIGHT button to
enter ODO mode.
ODOMETER (ODO)
Total distance travelled is indicated by
ODO and display on the bottom line. To
reset ODO, press and hold LEFT and
RIGHT buttons for 2 seconds or remove
the battery. Press the RIGHT button to
enter DST mode.
Rouleur 13 WL
USER'S MANUAL
IMPORTANT: Please read this leaflet carefully before using
your device.
Advertisement
