Related Manuals for Zaap TX-1000
Summary of Contents for Zaap TX-1000
- Page 1 Motorized Treadmill TX-1000 Please ensure you read the User Manual and Safety Instructions carefully prior to operating this treadmill.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Technical Specs....................1 Product Features ....................1 What’s in the Box ....................2 Tool Kit ........................2 Safety Instructions ....................3 Assembly Instructions................... 5 Folding Instructions ....................6 Operating Instructions ..................7 Running Board/Belt Maintenance ............... 10 Maintenance ....................... -
Page 3: Technical Specs
50 / 60Hz Max User Weight Machine Weight 120KG (17 stone) 24KG LCD Display Speed, Time, Distance, Calories PRODUCT FEATURES • Model: TX-1000 • UL power cord • User Manual • Handrests with padded foam • Running surface 34*100CM •... -
Page 4: What's In The Box
WHAT’S IN THE BOX Remove the treadmill and other components from the packaging – save the packaging until you have fully assembled and tested the treadmill. Note, returns must be returned in the original packaging for safety reasons. If any of the components are missing, damaged in transit or simply don’t work, please contact the Customer Care team immediately for further instructions. -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS Please read carefully prior to using this product. You should consult a physician before beginning any exercise program this is especially important if you are pregnant, sick injured or have a pre-existing medical condition. If whilst using the treadmill you feel dizzy, faint, short of breath or any pain STOP using the treadmill immediately and consult a physician. - Page 6 START the treadmill at the lowest speed and hold onto the handrests. Note, there should be a 3 second countdown before the running belt begins to move. In the event the treadmill malfunctions, PULL the safety key from the Control Pad – the treadmill will stop immediately, turn OFF the red power switch at the back of the treadmill, disconnect the power, and contact the customer care team for further instructions.
-
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS 5 easy steps to assemble your treadmill then you’re ready to workout. 1.Place the Treadmill frame on the ground and open the frame. 2. Adjust the Control Pad to the correct position for you and then screw the Control Pad Locks in place on the back of the Control Pad. -
Page 8: Folding Instructions
FOLDING INSTRUCTIONS TO FOLD After use, unscrew the safety lock on the bottom frame and place it in the safety lock holder, fold the treadmill and pull the expandable safety lock out from the upper frame and release to lock the treadmill in an upright position. TO UNFOLD Release the expandable safety lock and lower the bottom frame to the ground. -
Page 9: Operating Instructions
OPERATING INSTRUCTIONS SPEED TIME DISTANCE CALORIES QUICK START SPEEDS PRE-SET PROGRAMS SPEED (-) SPEED (+) MANUAL MODE PLACE SAFETY KEY HERE START STOP Safety key To start the treadmill, the Safety Key must be attached to the Control Pad (yellow circle) and your clothing. - Page 10 Control Pad 1. To select a pre-set program, keep pressing the PROG key to switch between programs. 2. Now change the TIME by using the Speed + and Speed – keys then press the START key to start the treadmill and a 3 second countdown will begin. Note, a 3 second countdown will begin each time the program is ready to change speeds.
- Page 11 Now press the START key and a 3 second countdown will begin. To change the speed, use the Quick Start Speed keys or the Speed + and Speed – keys. Stopping the treadmill To stop the treadmill at any time, simply press the STOP key or remove the Safety Key from the Control Pad.
-
Page 12: Running Board/Belt Maintenance
RUNNING BOARD/BELT MAINTENANCE The treadmill running belt has been pre-lubricated prior to leaving the factory. With use the running belt will move to the left or right and become loose. In order to protect your investment and prolong the life of your treadmill it’s important to know how to lubricate, tighten and align the running belt correctly. -
Page 13: Maintenance
ADJUST A LOOSE RUNNING BELT With use, the running belt will become loose. A simple way to check if the running belt is loose it is will bunch up in the middle of the belt. If you are running on the belt and it feels unstable (wobbly) or your feet are sticking to the belt, STOP the treadmill immediately and tighten the belt to avoid injury. -
Page 14: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION THERE IS NO Check the power outlet and the switch at the DISPLAY ON THE back of the treadmill are turned ON. CONTROL PAD. Check the Control Pad sensor wires are connected to the frame (A) and (B) – refer to the Assembly instructions above. - Page 15 TREADMILL Control Pad Emergency Safety Key Control Pad Sensor Wires Handrests Safety Lock (Expandable) Upper Frame Motor Cover Running Belt Safety Rails Safety Lock Safety Lock Holder Transport wheels Running Belt Rubber Feet This product is not intended to be used by persons including children with reduced physical abilities unless supervised.
- Page 16 Distributed globally by UK & Europe Shop 247 Units 3 & 4 Lower Park Farm Storrage Lane Alvechurch, Worcestershire B48 7ER United Kingdom Telephone: 01527 598388 USA – West Coast Shop247.com Inc Suite 110-120 16 Sunset Way Henderson, Nevada 89014 Telephone: 1-800-603-0004 USA –...
Need help?
Do you have a question about the TX-1000 and is the answer not in the manual?
Questions and answers