Important Safeguards & Precautions; Getting Started / Operating Instructions - Problend Touch 950 User Manual

IMPORTANT SAFEGUARDS & PRECAUTIONS
TO AVOID RISK OF PERSONAL INJURY OR DAMAGE
PLEASE FULLY READ THIS USER MANUAL BEFORE USE
DO NOT under any circumstances:
 Leave the blender unattended when in use.
 Touch any moving parts.
 Attempt to remove or replace the jug from the motor base during operation.
 Place your hands or any utensils in the jug at any time while the blender is switched on.
 Operate the blender when the jug is empty.
 Operate the blender without the jug lid in place.
 Use any attachments with this blender.
 Fill the jug more than 2/3 full when blending.
 Fill the jug above the 1 litre mark when blending hot liquids (always remove the lid insert to allow
steam to escape and start the motor on low speed or automatic mode).
 Use outdoors. This blender is for indoor use only.
 Place the blender base or power supply lead in water or in any other liquid.
 Let the power supply lead hang over the edge of the work surface.
 Operate the blender with a damaged power lead or plug, or after the blender malfunctions, is
dropped or damaged in any manner.
ALWAYS ensure the:
 Blender is switched off and unplugged when not in use or prior to cleaning and assembling.
 Jug is always handled with extreme care as the blade unit is extremely sharp.
 Blender is on a flat, level, stable and dry work surface prior to operation.
 Blade unit is regularly inspected and securely fitted to the jug.
 Jug is properly seated on the blender and aligned into the drive socket with the jug lid securely
fitted before switching the blender ON.
 Blade has stopped turning and the jug has been removed from the blender before removing
the lid.
 Blender is only operated by a competent trained person.
NOTE: To stop the blender whilst it is in operation, press any button or use the "off" switch.

GETTING STARTED / OPERATING INSTRUCTIONS

1. Remove the blender from the packaging and place it on a flat, level, stable and dry work
surface.
2. Insert the power plug into an electrical outlet.
3. Empty the ingredients into the jug and place it on the blender, ensuring it is properly seated and
aligned into the drive socket with the lid securely fitted.
4. For Manual Operation: Selecting the HIGH, MED or LOW options will start the blender, blending
continuously at the predetermined speed. Selecting the PULSE option will start the blender on
HIGH speed only, for as long as the button is held down.